Guhring 9041080210050 Replaceable-tip Drill 0.827-0.846 in

Product Description

The GUHRING 9041080210050 is a replaceable-tip drill body engineered for precision hole-making in metal fabrication and machining applications. Built from steel and designed around the HT 800 WP insert system, this drill accepts interchangeable cutting tips to reduce tooling cost while maintaining consistent bore geometry. It covers a diameter range of 0.827 to 0.846 inches with a maximum drill depth of 111.6 mm (4.394 inches) and an overall length of 204 mm (8.032 inches). Through-coolant capability is integrated into the body, directing cutting fluid directly to the tip for improved chip evacuation and thermal management at depth.

This drill body is suited to CNC machining centers and turning centers where high-volume drilling in steel, cast iron, and similar materials is performed. The 5xD reach makes it appropriate for medium-depth bores in structural components, flanges, and machined housings. A 1-inch straight shank provides compatibility with standard tool holders commonly found in production and job-shop environments. Licensed machinists and CNC operators are the primary users of this tooling.

Key Features

• Replaceable HT 800 WP insert tip system reduces downtime versus brazed or solid drill replacement
• Through-coolant design channels fluid to the cutting zone for chip evacuation and heat control
• Diameter range of 0.827 to 0.846 inches accommodates insert tip variation within the HT 800 WP family
• Maximum drill depth of 111.6 mm (4.394 inches) suits 5xD drilling applications
• 1-inch shank diameter fits standard ER and hydraulic chuck tool holders
• Steel body construction provides rigidity and durability in production drilling cycles

Compatibility

Designed for use with HT 800 WP series replaceable insert tips. The toolholder style is specified as 5xD HT 800 WP, Series 4108. No additional compatible model numbers or system families were identified in the product data.

Installation Notes

Installation and setup should be performed by a qualified machinist or CNC programmer. Secure the shank fully within the tool holder to the manufacturer-specified gauge line before operating. Verify that the machine coolant-through system is active and delivering sufficient pressure before engaging the cut, as dry operation with through-coolant tooling can accelerate tip wear. Inspect the insert seating and clamping screw torque each time a tip is replaced per the insert manufacturer guidelines.