Guhring 9002050015000 Jobber Drill Bit 1.5mm Hss

Product Description

The GUHRING 9002050015000 is a jobber length twist drill bit designed for general-purpose drilling in ferrous materials. Built from M2 high speed steel with a bright uncoated finish, this bit carries a 118-degree standard point angle and a web-thinned, tapered web configuration for improved centering and reduced thrust at entry. The straight-cylindrical shank measures 1.5 mm in diameter, matching the cutting diameter, and the overall length is 40 mm. With two spiral flutes and a regular spiral type, chip evacuation stays consistent through the cut. Licensed HVAC, plumbing, and mechanical contractors, as well as manufacturing maintenance technicians, reach for bits like this when drilling pilot holes or clearance holes in steel and cast iron components.

This bit suits light-duty production and field drilling tasks wherever a 1.5 mm hole diameter is required. Typical applications include drilling through mild steel plate, cast iron housings, sheet metal brackets, and similar ferrous workpieces. The DIN 338 standard geometry means it is dimensionally consistent with other DIN-spec tooling and compatible with standard drill chucks and collet holders that accept a 1.5 mm straight shank. Maximum recommended drilling depth is 15.75 mm, making it appropriate for through-holes in thin to moderate wall thickness material.

Key Features

• M2 high speed steel construction for durability in ferrous materials
• 118-degree standard point angle with web-thinned tapered web for accurate entry
• Bright uncoated finish suitable for general-purpose use without added coating cost
• Right-hand cut with regular spiral flutes for efficient chip removal
• Conforms to DIN 338 specification for consistent dimensional tolerances
• Diameter tolerance held to +0.000 to -0.014 mm for precise hole sizing

Compatibility

Designed as a DIN 338 general-purpose jobber length drill bit compatible with standard 3-jaw drill chucks and collet systems accepting a 1.5 mm straight-cylindrical shank. Rated for drilling cast iron and steel workpieces per primary workpiece material codes K and P.

Installation Notes

Installation of this drill bit requires a drill press, hand drill, or CNC spindle with a chuck or collet sized for a 1.5 mm shank. Secure the shank fully in the chuck before operation and confirm the workpiece is clamped or fixtured to prevent movement. Use appropriate cutting fluid or dry-cutting technique as recommended for the workpiece material. Inspect the cutting edges before each use and replace the bit if chipping or dullness is observed to maintain hole quality and prevent breakage.