Greenfield 406-34 Copper Clad Clevis Hanger 3/4 Inch Pipe

Product Description

The GREENFIELD 406-34 is a copper-clad clevis hanger designed to suspend stationary horizontal piping in plumbing and mechanical systems. Part of the FIG 406 Series, this hanger is sized for 3/4-inch pipe and accepts a 3/8-inch threaded rod. It carries a rated load capacity of 150 pounds, making it suitable for standard residential and light commercial pipe suspension applications. The copper-clad finish provides corrosion resistance and a clean appearance well-suited to exposed or semi-exposed installations. At 0.8 inches in height, this hanger fits into spaces where clearance is limited.

The 406-34 is used in horizontal pipe suspension applications across residential and commercial plumbing, HVAC piping, and mechanical systems. It is appropriate for installations where stationary pipe runs require a compact, corrosion-resistant support. Licensed plumbers and mechanical contractors typically install this type of hanger in overhead or structural applications where threaded rod and clevis-style supports are specified by the engineer or required by code.

Key Features

• Copper-clad finish for corrosion resistance and clean appearance
• Sized for 3/4-inch pipe with 3/8-inch rod compatibility
• 150-pound load capacity for reliable horizontal pipe support
• Compact 0.8-inch height suits installations with limited clearance
• Part of the FIG 406 Series, engineered for horizontal pipe suspension

Compatibility

Designed as an OEM-style replacement or direct-install clevis hanger for 3/4-inch horizontal stationary pipe suspension systems using 3/8-inch threaded rod.

Installation Notes

Installation is typically performed by a licensed plumber or mechanical contractor. Shut off the relevant piping system and relieve pressure before adjusting or replacing hangers in an active system. Follow IPC and applicable local mechanical codes for hanger spacing and rod sizing requirements. Verify that the structural anchor point is rated to support the combined load of the pipe, contents, and hanger assembly before fastening.