Green Leaf Tf 12 Pb 1/2 in Fpt Bulkhead Fitting

Product Description

The GREEN LEAF TF 12 PB is a threaded tube bulkhead fitting manufactured from polypropylene, designed to create a sealed fluid passage through a tank wall, panel, or enclosure. It uses female pipe thread (FPT) connections and is rated for a maximum working pressure of 75 psi. The fitting has an inner diameter of 0.753 inches, making it well suited for 1/2 inch tubing applications. Polypropylene construction provides resistance to corrosion, many common chemicals, and moisture, making it a practical choice for water, chemical handling, and irrigation systems. Licensed plumbers, pool and spa technicians, and irrigation installers commonly work with this type of fitting.

This bulkhead fitting is typically installed in plastic tanks, reservoirs, filter housings, and storage vessels where a leak-free through-wall connection is required. It is appropriate for residential and light commercial applications involving water treatment, chemical feed systems, pool equipment, and similar low-to-moderate pressure fluid handling setups. FPT thread engagement allows connection to standard male-threaded pipe or tubing adapters.

Key Features

• Polypropylene construction resists corrosion and common chemicals
• Maximum working pressure of 75 psi
• Inner diameter of 0.753 inches for 1/2 inch tubing compatibility
• Female pipe thread (FPT) connection on both ends for standard fittings
• Lightweight design at approximately 0.04 pounds

Compatibility

Designed as an OEM-style replacement or new-installation bulkhead fitting for 1/2 inch FPT threaded connections in plastic tanks, reservoir walls, and panel-mount fluid handling systems.

Installation Notes

Shut off all fluid supply and relieve system pressure before installing or replacing a bulkhead fitting. Ensure the tank wall or panel cutout is the correct diameter for a proper seal, and use appropriate thread sealant on FPT connections as required by local plumbing codes. Hand-tighten the fitting first to confirm thread alignment, then snug with a wrench — avoid overtightening polypropylene fittings, as the material can crack under excessive torque. Installation should comply with applicable local plumbing codes and manufacturer fitment guidelines.