Goodman gpch36031 Packaged Ac 13.4 SEER2 5 Ton Horizontal

Product Description

The GOODMAN gpch36031 is a 5-ton, single-stage horizontal packaged air conditioner rated at 13.4 SEER2 and 10.6 EER2, designed for ducted commercial and residential applications where horizontal installation is required. It uses R-32 refrigerant and delivers 56,000 BTU/h of cooling capacity through a scroll compressor paired with a multi-speed ECM indoor blower. The unit draws a minimum of 40.6 amps on a 208/230-volt, single-phase, 60 Hz power supply and requires a maximum overcurrent protection of 60 amps. Licensed HVAC technicians install and service this equipment.

This unit is intended for horizontal rooftop or slab-side applications in ducted systems. The ECM blower operates at five speeds, providing airflow up to 1,650 cubic feet per minute on high in both cooling and heating modes. The unit is suited for light commercial, multi-family, and residential replacement or new-construction projects where a self-contained packaged cooling solution is required. It ships as a single outdoor unit and connects to existing duct infrastructure. Compatible accessory and component references from the manufacturer include: 0259G00213, DDNECNJPCHHA, DHZECNJPGCHM, DPHFRA, GPHMD101-103, INFKPKG01, IRKT-01, OT18-60A, PCCP101-103, PCEF101-103, PCMD101-103, PCMDM101-103, PCP101-103, PCP101-103R8, SQRPC102-103, and SQRPCH102-103.

Key Features

• 13.4 SEER2 and 10.6 EER2 efficiency ratings for horizontal ducted installations
• Single-stage scroll compressor with 56,000 BTU/h rated and maximum cooling capacity
• Multi-speed ECM indoor blower motor at up to 1,650 ft cubed/min airflow
• R-32 refrigerant with factory charge of 78 oz and TXV indoor expansion device
• 4-blade, 22-inch condenser fan at 1,075 RPM with 4-row evaporator coil and aluminum fins
• ETL Listed; 78 dBA sound pressure level at high cooling speed

Compatibility

The gpch36031 is part of the Goodman GPCH3 series. Manufacturer-referenced compatible components and accessories include part numbers 0259G00213, DDNECNJPCHHA, DHZECNJPGCHM, DPHFRA, GPHMD101-103, INFKPKG01, IRKT-01, OT18-60A, PCCP101-103, PCEF101-103, PCMD101-103, PCMDM101-103, PCP101-103, PCP101-103R8, SQRPC102-103, and SQRPCH102-103.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes and applicable sections of the IFGC. Disconnect and lock out all electrical power before servicing or making connections. Confirm that the supply circuit provides 208/230 volts, single phase, 60 Hz with a maximum overcurrent protection of 60 amps and a minimum circuit ampacity of 40.6 amps. Verify horizontal orientation and duct connections before startup; do not operate the unit without proper refrigerant charge verification by a certified technician.

Technical Specifications

• Cooling Capacity (Rated): 56,000 BTU/h
• Cooling Capacity (Sensible): 40,800 BTU/h
• Sensible Heat Ratio: 0.73
• SEER2: 13.4
• EER2: 10.6
• Tonnage: 5 tons
• Refrigerant Type: R-32
• Factory Refrigerant Charge: 78 oz
• Power Voltage: 208/230 volts
• Power Phase: 1 phase
• Power Frequency: 60 Hz
• Minimum Circuit Amps: 40.6 A
• Max Overcurrent Protection: 60 A
• Total Unit Amps: 33.9 A
• Compressor Type: Scroll, Single Stage
• Compressor RLA: 178 A
• Compressor LRA: 178 A
• Indoor Blower Motor Type: Multi-Speed ECM
• Number of Blower Speeds: 5
• Blower Motor Horsepower: 3/4 hp
• Evap Motor RLA: 5.4 A
• Evap Motor RPM: 1,050 RPM
• Airflow Rate (High Cooling): 1,650 ft cubed/min
• Airflow Rate (High Heating): 1,650 ft cubed/min
• Evaporator Coil Rows: 4
• Evaporator Coil Face Area: 7.01 sq ft
• Evaporator Coil Metal: Aluminum
• Evaporator Fin Density: 14 fins per inch
• Expansion Device: TXV (orifice)
• Condenser Coil Rows: 2
• Condenser Fin Density: 20 fins per inch
• Condenser Fan Blade Count: 4
• Condenser Fan Diameter: 22 inches
• Condenser Fan RPM: 1,075 RPM
• Condenser Fan Horsepower: 1/4 hp
• Outdoor Fan FLA: 1.4 A
• Outdoor Fan LRA: 3.2 A
• External Static Pressure (Rated): 0.8 inches W.C.
• System High Pressure: 660 psi
• Sound Pressure (High Cooling): 78 dBA
• Gas Pipe Size: 1/2 inch
• Liquid Pipe Size: 3/8 inch
• Condensate Drain Outlet: 3/4 inch
• Unit Width: 66 inches
• Unit Height: 38.5 inches
• Unit Depth: 34 inches
• Blower Diameter: 11 inches
• Blower Width: 8 inches
• Unit Weight: 400 pounds
• Installation Configuration: Horizontal
• Installation Type: Ducted
• Energy Source: Electric
• ETL Listed: Yes
• Warranty (Residential Registered): All Parts 10 Years
• Warranty (Residential Standard): All Parts 5 Years
• Warranty (Commercial Registered): All Parts 5 Years
• Warranty (Multi-Family Registered): All Parts 10 Years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: gpch36031