Goodman amvc960403bn 40K Btu 96 Afue Two Stage Gas Furnace

Product Description

The Goodman amvc960403bn is a 96 AFUE two-stage, variable-speed upflow/horizontal gas furnace rated at 40,000 BTU/h high-fire input with 38,440 BTU/h output. It uses an ECM blower motor running at up to 1,200 RPM for variable-speed airflow, delivering between 710 and 1,015 cubic feet per minute in heating mode. The two-stage gas valve allows low-fire operation at 28,000 BTU/h input, reducing short-cycling and improving comfort. This unit is ENERGY STAR certified, ANSI certified, ETL listed, and FER compliant. Licensed HVAC technicians install this furnace as part of a ducted forced-air system in residential or light commercial applications.

The amvc960403bn is configured for upflow or horizontal installation and is sized for nominal 3-ton cooling capacity, with blower compatibility ranging from 1.5 to 3 tons. The cabinet measures 17.5 inches wide, 34.5 inches tall, and 28.75 inches deep, making it suitable for closet, utility room, basement, or attic horizontal installations. It supports ComfortBridge Technology communication for use in communicating system setups. The Non-NOx burner design meets low-emissions requirements in applicable jurisdictions. A single 16x25 filter services the unit.

Key Features

• 96 AFUE two-stage operation: high fire at 40,000 BTU/h input, low fire at 28,000 BTU/h input
• Variable-speed ECM blower motor at up to 1,200 RPM for quiet, efficient airflow
• ComfortBridge Technology compatible for communicating system control
• Upflow and horizontal installation configurations supported in a single unit
• Non-NOx burner design for low-emissions compliance
• ENERGY STAR certified, ANSI certified, ETL listed, and FER compliant

Compatibility

The amvc960403bn is part of the Goodman AMVC96 series and is compatible with 1.5 to 3-ton cooling systems. Referenced accessory and component part numbers from the manufacturer include 0170K00000S, 0170K00001S, AFE18-60A, CTK04, CVENT-2, CVENT-3, EFR02, HASFK-1, LPLP03, LPM-08, and RF000142. AHRI Reference Number: 7368870.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with applicable local codes, the National Fuel Gas Code (NFPA 54/ANSI Z223.1), and the manufacturer installation instructions. Disconnect all power to the system before beginning any service or installation work. Vent diameter is 2 inches or 3 inches; verify vent sizing and material against local code and the installation manual before connecting. Minimum clearance to combustible materials must be maintained per rated specifications.