Global Industrial 244193AB Mobile Packing Workbench 60x30

Product Description

The GLOBAL INDUSTRIAL 244193AB is a mobile electric packing workbench designed for warehouse, shipping, and industrial environments. The worksurface is a 1-5/8 inch thick plastic laminate top with a safety edge profile, supported by heavy-duty 2 inch square 14-gauge steel tubular legs. The bench stands 36 inches high and is load-tested to 2,000 pounds with evenly distributed weight. This kit ships as a complete assembly including the workbench, a pre-wired power apron, a riser kit with LED lighting, and a 5 inch phenolic swivel caster set. A powder coat finish provides durability in high-traffic work areas. Assembly is designed to be straightforward without specialized tooling.

This workbench is suited for packing, shipping, and light assembly operations in commercial or industrial facilities. The pre-wired power apron delivers three duplex 15 amp/115 volt outlets with a circuit breaker and a 13 inch quick-disconnect power cord, supporting power tools and electrical equipment at the bench. The riser kit adds 48 inch uprights, a bin rail, a reel holder, two 12 inch depth shelves (one with six adjustable carton dividers), and a 60 inch wide LED light kit. The 5 inch phenolic swivel casters with brakes allow repositioning on hard floor surfaces while locking the bench in place during use.

Key Features

• 1-5/8 inch thick plastic laminate safety edge worksurface rated to 2,000 pounds distributed load
• Heavy-duty 2 inch square 14-gauge steel tubular legs with powder coat finish
• Pre-wired power apron with three duplex 15 amp/115 volt outlets, circuit breaker, and 13 inch quick-disconnect cord
• Riser kit includes 48 inch uprights, bin rail, reel holder, two 12 inch depth shelves, and 60 inch LED light kit
• One shelf includes six adjustable carton dividers for organized packing workflows
• 5 inch phenolic swivel casters with brakes for controlled mobility on hard floors

Compatibility

Designed as a self-contained mobile workbench kit for industrial and warehouse packing applications. Includes all listed components - workbench, power apron, riser kit, and caster kit - as shipped.

Installation Notes

Assembly is required and should be performed by personnel familiar with industrial furniture assembly. Ensure the power apron is connected to a properly grounded 115 volt circuit in compliance with applicable NEC requirements. Lock all caster brakes before placing loads on the bench or using powered equipment at the station. Verify all fasteners are fully tightened before applying any load to the surface or riser structure.