Global Industrial 183427A Mobile Workbench 48x30 Maple Butcher Block

Product Description

The GLOBAL INDUSTRIAL 183427A is a mobile workbench built for demanding shop and facility environments. The work surface is a kiln-dried maple butcher block top, electronically glued and sanded to 1.75 inches thick, then finished with a penetrating mineral oil for durability and a clean appearance. The fixed-height design holds the work surface at 40 inches above the floor. Flared legs are reinforced with cross bracing for added rigidity, and the entire steel frame is finished in scratch-resistant gray baked enamel. Licensed trades and maintenance crews in industrial, manufacturing, and facilities settings install and use this bench as a primary work surface.

This workbench is suited for industrial shops, maintenance departments, and light manufacturing environments where a mobile, heavy-duty work surface is required. The 48 x 30 inch top provides a generous layout area for assembly, repair, or fabrication tasks. Mobility is handled by four 5-inch casters - two rigid and two swivel with brakes - allowing the bench to be positioned and locked in place as needed. Flared legs include removable duplex knock-outs that accept standard electrical outlets, though outlets are not included.

Key Features

• Kiln-dried maple butcher block top, sanded to 1.75 inches thick and finished with penetrating mineral oil
• Fixed work surface height of 40 inches for consistent ergonomic positioning
• Flared legs with cross bracing for structural rigidity under load
• 5-inch casters - 2 rigid, 2 swivel with brakes - for controlled mobility and lockdown
• Removable duplex knock-outs in legs to accept electrical outlets (outlets not included)
• Scratch-resistant gray baked enamel finish on steel frame

Compatibility

Designed as a freestanding mobile workbench for general industrial, shop, and facilities maintenance use. Electrical outlet compatibility depends on standard duplex outlet dimensions; outlets are field-supplied and not included with this unit.

Installation Notes

This workbench ships unassembled and requires assembly before use. A licensed electrician should install any electrical outlets into the leg knock-outs in accordance with applicable NEC requirements. Verify caster brakes are fully engaged before placing the bench under load. Inspect all cross-brace fasteners and hardware connections after assembly and periodically during use.