Gibraltar TSW-4M-G Tapped Leveling Mount 3/4-10 Thread 650 Lb

Product Description

The GIBRALTAR TSW-4M-G is a tapped leveling mount designed for industrial and commercial equipment positioning applications. It accepts a 3/4-10 threaded stud and supports a load capacity of 650 pounds, making it suitable for heavy machinery, fabricated frames, enclosures, and production equipment that requires precise leveling adjustments. The mount features a zinc stud and zinc pad construction for corrosion resistance in light industrial environments. With a 3-inch base diameter and an overall length of 2.125 inches, it provides a stable footprint without occupying excessive floor space. Machinists, millwrights, and equipment installers use this type of mount to achieve level, vibration-dampened equipment placement on concrete and steel surfaces.

This leveling mount is used in manufacturing, assembly, and mechanical equipment installations where floor surfaces are uneven or where post-installation leveling adjustments are required. It is appropriate for both permanent equipment installations and applications where periodic repositioning is needed. The tapped design allows the stud to thread directly into a tapped hole in the equipment base, eliminating the need for a separate nut on top of the mounting surface. This mount is sold individually and is suited for light commercial and industrial service work.

Key Features

• 650 pound load capacity for use on heavy production and commercial equipment
• 3/4-10 tapped thread accepts standard UNC threaded studs for direct installation
• 3-inch base diameter provides a stable, wide footprint for load distribution
• Zinc stud and zinc pad construction offers corrosion resistance in indoor industrial environments
• Overall length of 2.125 inches keeps equipment close to floor level while still allowing leveling adjustment
• 1-1/16 inch hex size allows use of standard wrenches for height adjustment

Compatibility

Designed as a direct-install tapped leveling mount for equipment with a 3/4-10 threaded mounting hole. Suitable for use on fabricated steel frames, production machinery bases, enclosures, and similar equipment requiring adjustable floor-level support.

Installation Notes

Installation is performed by millwrights, maintenance technicians, or equipment installers. Thread the stud into the tapped hole in the equipment base before placing the unit on the floor surface. Use a 1-1/16 inch wrench on the hex to adjust height and achieve level after placement. Ensure the floor surface can support the full rated load before finalizing the installation, and verify that all mounts on a multi-point installation are loaded evenly to avoid overloading any single mount.