Gibraltar SS-TSW-4L-G Tapped Leveling Mount 325 Lb

Product Description

The GIBRALTAR SS-TSW-4L-G is a tapped leveling mount designed to provide stable, adjustable support for machinery, equipment frames, and fabricated assemblies. It features a 3/4-10 threaded stud and a 3-inch diameter base pad, both constructed from stainless steel for corrosion resistance in demanding environments. With a load capacity of 325 pounds, this mount handles significant static loads while allowing precise height adjustment during equipment leveling. The overall length is 2-1/8 inches, and the hex size is 1-1/16 inches for standard wrench engagement. Millwrights, machine installers, and industrial maintenance technicians are the primary installers of this type of hardware.

This leveling mount suits applications in food processing, pharmaceutical, marine, and general industrial environments where moisture or chemical exposure rules out carbon steel hardware. The stainless steel pad and stud resist rust and surface degradation over extended service life. It is appropriate for use under fabricated frames, conveyors, processing equipment, workbenches, and similar structures requiring a firm, adjustable footing on hard floor surfaces.

Key Features

• 325 lb load capacity per mount for heavy equipment support
• 3/4-10 tapped thread for direct engagement with threaded holes in equipment bases
• Stainless steel stud and pad construction for corrosion resistance
• 3-inch base diameter distributes load across the floor surface
• 1-1/16 inch hex size accommodates standard wrench or socket for height adjustment
• Overall length of 2-1/8 inches suits low-profile leveling applications

Compatibility

Designed as an OEM-style tapped leveling mount for industrial machinery, fabricated frames, and equipment bases requiring a 3/4-10 threaded mount with stainless steel construction.

Installation Notes

Installation is performed by millwrights or maintenance technicians using a standard 1-1/16 inch open-end or box wrench. The receiving equipment base must have a properly tapped 3/4-10 threaded hole before installation. Power down and de-energize all connected equipment before positioning or adjusting leveling mounts. Confirm that the combined load across all mount points does not exceed the rated capacity of each individual mount.