Gibraltar SP13203 Fixed Eye Bolt 1400 Lb 3/8-16 Thread

Product Description

The GIBRALTAR SP13203 is a fixed lifting eye bolt designed for overhead lifting and rigging applications in industrial, commercial, and trade environments. Built from C-1035 grade steel with a hot-dipped galvanized finish, this eye bolt carries a rated lifting capacity of 1,400 pounds. The shank is fully threaded at 3 inches in length with a 3/8-16 thread size, providing a secure and consistent engagement when fastened into structural members or lifting fixtures. Electricians, millwrights, riggers, and mechanical contractors commonly install this type of hardware when mounting equipment for overhead service or staged lifts.

This fixed-style eye bolt is suited for straight vertical lifting loads. The 3/8-16 thread makes it compatible with standard tapped holes and fastener hardware in that size class. The hot-dipped galvanized coating provides corrosion resistance for use in damp, outdoor, or moderately corrosive environments. The inside diameter of the eye measures 1 inch, accommodating hooks, shackles, and rigging hardware appropriate for the rated capacity. This part ships as a single unit with no shoulder, meaning load must be applied in line with the shank axis.

Key Features

• 1,400 lb rated lifting capacity for vertical straight-line loads
• Fully threaded 3-inch shank with 3/8-16 thread for secure engagement
• C-1035 grade steel construction for dependable tensile strength
• Hot-dipped galvanized finish for corrosion resistance in outdoor or wet environments
• 1-inch eye inside diameter accommodates standard hooks and shackles
• Without-shoulder design — load axis must remain in line with the bolt shank

Compatibility

Designed as a standard fixed eye bolt for use in applications requiring a 3/8-16 threaded fastener with a 1,400 lb straight vertical lift rating. Consult applicable rigging and load charts to confirm suitability for the specific application.

Installation Notes

Installation should be performed by a qualified rigger or tradesperson familiar with applicable ASME B30 rigging standards and local safety regulations. Always power down or de-energize associated equipment before installing or removing lifting hardware in live service areas. Thread the bolt fully into a properly tapped hole and confirm snug seating before applying any load. Without-shoulder eye bolts must not be used for angled or side-loaded lifts — use only for in-line vertical loading to stay within the rated capacity.