Gibraltar 23040.0102 Unequal Double Threaded Stud M10 X 1.5

Product Description

The GIBRALTAR 23040.0102 is an unequal double threaded stud made from heat-treated alloy steel. It features an M10 x 1.5 thread profile with an overall length of 80 mm and a material grade of 10.9, indicating high tensile strength suitable for demanding fastener applications. One end carries a long thread of 50 mm while the opposite end has a short thread of 13 mm, with an unthreaded shank of 17 mm between them. This stud is classified to DIN 787 thread fit standards. Machinists, millwrights, and industrial maintenance technicians install this type of fastener in machinery and structural assemblies where differential thread engagement on each end is required.

This stud is suited for industrial and mechanical assembly applications where a fixed anchor point on one end and a removable connection on the other are needed. The unequal thread lengths allow the longer end to be permanently set into a tapped bore while the shorter end accepts a nut for clamping or securing components. Typical use cases include machine tool fixtures, equipment mounting frames, and heavy mechanical assemblies requiring Grade 10.9 fastener performance.

Key Features

• M10 x 1.5 thread size on both ends, conforming to DIN 787 thread fit class
• Long thread length of 50 mm for deep engagement in tapped bores
• Short thread length of 13 mm for nut-side clamping
• Unthreaded shank length of 17 mm for shear load transfer
• Alloy steel construction with heat-treated finish for Grade 10.9 tensile performance
• No flat ground on shank, consistent with standard DIN-style double-end stud design

Compatibility

Designed as a DIN 787 class unequal double threaded stud for use in tapped bores and mechanical assemblies requiring M10 x 1.5 thread engagement.

Installation Notes

Installation is typically performed by machinists or industrial maintenance technicians using a stud driver or double-nut method to thread the long end into the tapped receiving bore without damaging the threads. Ensure the tapped bore is clean and free of debris before installation. Torque values should be referenced from applicable engineering specifications for Grade 10.9 M10 fasteners as defined by the governing fastener standard in use. Verify thread engagement depth meets design requirements before applying clamping load to the short end.