Genesis Cable 45111104 16/2 Solid Fplp Fire Alarm Cable

Product Description

The GENESIS CABLE 45111104 is a 16 AWG 2-conductor solid-conductor fire alarm cable with a plenum-rated FPLP jacket. Designed for use in fire detection and signaling systems, this cable meets the demand for low-smoke, limited-combustible wiring in plenum air-handling spaces. The solid conductor construction supports reliable signal integrity in unshielded fire alarm circuits. It ships in a 1,000-foot pull box and is identified by a red jacket for quick visual identification during installation and inspection. Licensed fire alarm installers and low-voltage electricians are the primary trades working with this product.

This cable is suited for use in commercial and residential fire alarm system wiring where plenum-rated cable is required by code. FPLP-rated cables are specified for installation in air ducts, raised floors, and ceiling plenums where smoke and flame spread characteristics must meet the requirements of NFPA 72 and NFPA 90A. The unshielded design is appropriate for standard initiating device circuits, notification appliance circuits, and signaling line circuits where shielding is not required by the system design.

Key Features

• 16 AWG solid conductor construction for stable resistance in fire alarm circuits
• 2-conductor configuration for standard two-wire fire alarm circuit wiring
• FPLP plenum rating meets low-smoke and flame-spread requirements for air-handling spaces
• Unshielded design suitable for general fire alarm signaling applications
• Red jacket provides immediate visual identification as fire alarm wiring
• 1,000-foot pull box format reduces handling time on larger installation runs

Compatibility

Designed as a standard FPLP-rated replacement or new-installation cable for unshielded fire alarm circuits in commercial and residential applications where plenum-rated, 16 AWG 2-conductor solid cable is specified.

Installation Notes

Installation should be performed by a licensed fire alarm or low-voltage electrician in accordance with NFPA 72, NFPA 90A, and applicable local codes. De-energize the fire alarm control panel and follow lockout procedures before making any circuit connections. Avoid sharp bends and maintain the minimum bend radius to preserve conductor integrity. All plenum installations must comply with the cable routing and support requirements of the local authority having jurisdiction.