Genesis Cable 44091004 14/4 Solid Fplr CL3R Fire Alarm Cable Red

Product Description

The GENESIS CABLE 44091004 is a 14 AWG, 4-conductor solid fire alarm and control cable rated FPLR and CL3R, supplied on a 1000-foot reel in red jacket. FPLR (Fire Power Limited Riser) rating allows installation in riser applications between floors in commercial and residential buildings. The CL3R dual-rating makes it suitable for Class 3 remote-control and signaling circuits in the same riser environments. Solid conductors at 14 AWG deliver low-resistance signal transmission for fire alarm initiating device circuits, notification appliance circuits, and access control wiring where riser-rated cable is required by code.

This cable is used primarily in commercial fire alarm system installations and life safety wiring projects. Electricians and fire alarm system technicians install it in vertical riser conduit runs, between floors in multi-story buildings, and in applications requiring both fire alarm and Class 3 control circuit ratings. The red jacket provides immediate visual identification as fire alarm cable, consistent with NFPA 72 installation practices. It is well-suited for connecting pull stations, smoke detectors, horn-strobe notification devices, and control panels in new construction and retrofit projects.

Key Features

• FPLR rating approved for riser installation between floors per NFPA 70 Article 760
• CL3R dual-rating supports Class 3 remote-control and signaling circuits in riser applications
• 14 AWG solid conductors for low-resistance runs on fire alarm initiating and notification circuits
• 4-conductor configuration supports multi-wire fire alarm and control circuit layouts
• Red jacket provides standard visual identification for fire alarm system wiring
• 1000-foot reel quantity suits large commercial installation pulls

Compatibility

Designed as an FPLR- and CL3R-rated riser cable for use with fire alarm control panels, initiating device circuits, and notification appliance circuits in systems requiring 14 AWG 4-conductor solid riser-rated wiring.

Installation Notes

Installation must be performed by a licensed electrician or certified fire alarm technician in accordance with NFPA 70 (NEC) Article 760 and NFPA 72 requirements. De-energize the fire alarm control panel and associated circuits before making any connections. Maintain minimum bend radius during pulls to avoid conductor damage, and do not exceed the cable's rated pulling tension. Riser installations must be firestopped at each floor penetration per applicable building code.