Genesis Cable 43131004 14/2 Solid Fplr Fire Alarm Cable

Product Description

The GENESIS CABLE 43131004 is a 14 AWG, 2-conductor solid-conductor fire alarm cable rated FPLR (Fire Power Limited Riser) and supplied in a 1,000-foot roll in red jacketing. This cable is designed for use in fire detection and signaling systems where a riser-rated, unshielded solid-conductor cable is required. The FPLR rating qualifies it for vertical runs between floors in commercial and residential buildings, meeting the code requirements for riser applications. Licensed electricians and fire alarm system installers use this cable to wire control panels, initiating devices, and notification appliances in life-safety systems.

This cable is suited for fire alarm circuits in both commercial and residential new construction and retrofit projects. Its solid 14 AWG conductors provide reliable signal and power transmission over extended runs typical in larger buildings. The red jacket allows for quick visual identification during installation and inspection, a common requirement in fire alarm wiring practice. It is appropriate for use in vertical shaft, riser, and general fire alarm signal wiring applications where an unshielded, solid-conductor cable meets the system design specifications.

Key Features

• FPLR (Fire Power Limited Riser) rating for use in vertical riser runs between floors
• 14 AWG solid conductors for stable, low-resistance signal and power circuits
• 2-conductor configuration for standard fire alarm initiating and signaling circuits
• Red jacket for code-compliant visual identification of fire alarm wiring
• 1,000-foot roll quantity reduces splice points on long runs
• Unshielded design suited for standard fire alarm applications not requiring EMI shielding

Compatibility

Designed for use in FPLR-rated fire alarm and life-safety signaling circuits in residential and commercial buildings where a solid, unshielded 14/2 riser cable meets system design and local code requirements.

Installation Notes

Installation should be performed by a licensed electrician or certified fire alarm technician in accordance with NFPA 72 and applicable local codes. De-energize the fire alarm control panel and any connected circuits before making connections or pulling new cable. Maintain minimum bend radius and avoid sharp edges or mechanical stress on the cable jacket during pull-through. Riser-rated cable must be installed in vertical runs in accordance with NEC Article 760 requirements for FPLR applications.