Genesis Cable 43111104 16/2 Solid Fplr Fire Alarm Cable Red

Product Description

The GENESIS CABLE 43111104 is a 16 AWG 2-conductor solid-conductor fire alarm cable rated FPLR (Riser) and packaged in a 1000-foot box in red jacket. FPLR-rated cable is listed for use in riser applications — vertical runs between floors in commercial and residential buildings — where flame spread must be contained within the shaft. This cable is designed for use in fire alarm and life-safety signaling circuits and is typically installed by licensed fire alarm technicians and low-voltage electricians working under NFPA 72 and local AHJ requirements.

This cable is suited for 2-wire supervised fire alarm initiating device circuits, notification appliance circuits, and control circuits in both new construction and retrofit projects. Its solid conductor construction supports reliable point-to-point wiring in panel-to-device runs where flexibility is not a primary requirement. The red jacket provides immediate visual identification as a fire alarm circuit, consistent with common field and code conventions.

Key Features

• 16 AWG solid conductor construction for stable resistance in fixed fire alarm circuit runs
• FPLR riser rating permits vertical installation in shaft and riser applications per NEC Article 760
• 2-conductor configuration for standard supervised initiating device and notification circuits
• Red PVC jacket for visual circuit identification as required by many AHJs
• 1000-foot box packaging simplifies job-site pulls and inventory tracking
• Unshielded design appropriate for standard fire alarm signaling circuits not requiring EMI protection

Compatibility

Designed as an OEM-style fire alarm cable for use in FPLR-rated riser installations on standard 2-wire supervised fire alarm circuits. No specific panel or device compatibility was provided in the product data.

Installation Notes

Installation must be performed by qualified fire alarm or low-voltage electricians in accordance with NFPA 72, NEC Article 760, and applicable local codes. De-energize and lock out the fire alarm control panel before making any circuit connections. FPLR cable must be installed in riser or vertical runs as permitted by its listing — do not substitute for plenum-rated (FPLP) cable in air-handling spaces. Secure and support cable at intervals required by the AHJ and avoid running alongside high-voltage conductors without proper separation.