Genesis Cable 31141012 18/2 Stranded CL2P Security Cable 1000 Ft

Product Description

The GENESIS CABLE 31141012 is an 18 AWG 2-conductor stranded, unshielded, jacketed security cable rated CL2P for plenum-rated installations. It is designed for low-voltage signal and control wiring in security and alarm systems. The CL2P rating indicates compliance with plenum-space installation requirements, making it suitable for use in air-handling spaces where fire and smoke propagation standards apply. This cable comes on a 1000-foot roll in a beige jacket. It is typically installed by licensed low-voltage technicians and alarm system contractors.

This cable is used in residential and light commercial security, intrusion detection, and access control applications. The stranded conductor construction provides flexibility during routing through walls, conduit, and above-ceiling plenum spaces. The beige jacket color is common for concealed installations where the cable may be surface-run along walls or ceilings without additional conduit.

Key Features

• 18 AWG stranded conductors for flexible routing in tight spaces
• 2-conductor configuration suits common security and alarm signal runs
• CL2P plenum rating meets fire and smoke propagation requirements for air-handling spaces
• Unshielded plain construction keeps installation straightforward for standard security wiring
• 1000-foot roll reduces splice points on longer runs
• Beige jacket blends with standard interior finishes for surface-run installations

Compatibility

Designed as a standard low-voltage 18 AWG 2-conductor stranded security cable suitable for use with typical alarm panels, motion detectors, door and window contacts, and other low-voltage security devices requiring CL2P-rated wiring.

Installation Notes

Installation should be performed by a licensed low-voltage or alarm contractor in accordance with applicable local codes and NFPA 72 requirements. De-energize all connected equipment before terminating conductors. CL2P-rated cable is required when routing through plenum air-handling spaces and must not be substituted with a lower-rated cable in those areas. Verify conductor polarity at each termination point before commissioning the system.