Genesis Cable 21095509 22AWG 12C Riser Security Cable 500ft

Product Description

The GENESIS CABLE 21095509 is a 22 AWG 12-conductor stranded unshielded riser-rated security cable, supplied in a 500-foot pull box in gray jacket. This cable is designed for low-voltage security and alarm wiring in riser applications, meaning it runs vertically between floors inside a building. The stranded conductor construction provides flexibility during installation, making it easier to route through conduit or cable pathways. Riser-rated (CMR) insulation meets fire propagation requirements for vertical runs in commercial and residential structures. Licensed low-voltage and security technicians are the primary installers of this cable type.

This cable is suited for interior security system wiring including burglar alarm panels, access control runs, motion detector circuits, and similar low-voltage signal applications. The 12-conductor configuration supports multi-zone or multi-device wiring from a single cable run, reducing the number of individual pulls required. The gray jacket blends with standard commercial interiors and is compatible with typical low-voltage junction boxes and termination hardware used in security installations.

Key Features

• 22 AWG stranded conductors for flexibility during routing and termination
• 12 conductors per cable for multi-zone or multi-device low-voltage wiring
• Unshielded construction suited for standard security signal circuits
• Riser-rated (CMR) jacket meets fire code requirements for vertical building runs
• 500-foot pull box format reduces waste and simplifies on-site dispensing
• Gray jacket suitable for typical commercial and residential interior environments

Compatibility

Designed as an OEM-style replacement and standard-fit cable for residential and commercial low-voltage security, alarm, and access control wiring systems requiring a riser-rated 22 AWG multi-conductor stranded cable.

Installation Notes

Installation should be performed by a licensed low-voltage or security systems technician in accordance with applicable local codes and NFPA 70 (NEC) Article 725 for Class 2 and Class 3 remote-control and signaling circuits. Verify that riser-rated cable is required by the authority having jurisdiction before installation in vertical shaft or floor-to-floor runs. De-energize all connected equipment and panels before making terminations. Do not exceed the cable's voltage and temperature ratings, and avoid sharp bend radii that could damage stranded conductors.