Genesis Cable 21031105 22AWG 4C Solid Riser Cable 1000 Ft

Product Description

The GENESIS CABLE 21031105 is a 22 AWG 4-conductor solid unshielded riser-rated cable supplied in a 1000-foot box. Finished in green jacket, this cable is engineered for low-voltage signal and control wiring in riser applications where flame spread must be contained between floors. The solid conductor construction maintains consistent resistance across long runs, making it well suited for security systems, access control, fire alarm auxiliary circuits, and building automation wiring. Licensed low-voltage electricians and security system technicians are the primary installers of this cable type.

This cable is used in commercial and residential riser installations where NEC Article 800 or Article 760 riser-rating requirements apply. It is routed vertically between floors in conduit or open plenum-adjacent chases that call for CMR or equivalent riser-rated conductors. Typical applications include intrusion detection wiring, door contact loops, card reader runs, thermostat control wiring, and intercom system home runs. The 1000-foot pull box format is sized for new construction and large retrofit projects where technicians need extended continuous runs without mid-run splices.

Key Features

• 22 AWG solid conductors for stable resistance on long low-voltage signal runs
• 4-conductor configuration supports multi-zone or multi-function wiring in a single cable
• Unshielded construction simplifies termination where EMI isolation is not required
• Riser-rated jacket meets NEC vertical flame-spread requirements for floor-to-floor routing
• Green jacket aids visual identification in multi-cable installations
• 1000-foot box format reduces splice points and speeds rough-in on large jobs

Compatibility

Designed as a standard riser-rated low-voltage cable suitable for security, access control, building automation, and auxiliary fire alarm wiring systems that require 22 AWG 4-conductor solid unshielded conductors.

Installation Notes

Installation should be performed by a licensed low-voltage technician or electrician in accordance with the NEC and applicable local codes. De-energize all connected equipment and control panels before making terminations. Solid conductors require appropriate punch-down or screw-terminal connectors rated for solid wire. Avoid sharp bends and kinking during pull-through to prevent conductor damage that could affect signal integrity.