Genesis Cable 21031102 22/4 Solid Riser Cable 1000 Ft Yellow

Product Description

The GENESIS CABLE 21031102 is a 22 AWG 4-conductor solid unshielded riser-rated cable supplied in a 1000-foot box. Designed for low-voltage signal and control wiring in commercial and residential buildings, this cable carries a riser (CMR) rating that meets fire-code requirements for vertical runs between floors. The solid conductor construction maintains stable resistance over long runs, making it well-suited for security systems, access control, fire alarm initiating circuits, and building automation wiring. The yellow jacket provides easy visual identification in conduit or cable bundles. Installation is performed by licensed low-voltage technicians and electricians working to NEC Article 800 and local riser-wiring requirements.

This cable is used in riser applications where a CMR-rated 4-conductor low-voltage wire is required. Typical installations include security alarm panels, card-access control runs, intercom wiring, thermostat and HVAC control circuits, and general-purpose signal distribution. The 1000-foot box format is suited for new construction pulls and large retrofit projects. Solid conductors are preferred for punch-down terminations at terminal blocks and data-style connections common in security and building-control panels.

Key Features

• 22 AWG solid conductors provide consistent resistance for long signal runs
• 4-conductor configuration supports multi-zone or multi-function low-voltage circuits
• Riser (CMR) rating meets NEC requirements for vertical floor-to-floor cable runs
• Unshielded construction keeps cable flexible and easy to route in conduit or open plenum-free pathways
• Yellow jacket enables fast visual identification during installation and service
• 1000-foot box quantity reduces splices on large jobs and supports continuous pulls

Compatibility

Designed as an OEM-style replacement and standard-stock riser cable for residential and commercial low-voltage control and security wiring applications requiring a 22 AWG 4-conductor CMR-rated unshielded cable.

Installation Notes

Installation must be performed by a licensed low-voltage technician or electrician in accordance with NEC Article 800 and applicable local codes governing riser cable routing. De-energize all connected control panels and circuits before terminating conductors. Solid conductors are not recommended for applications requiring repeated flexing; use stranded cable in those scenarios. Maintain minimum bend radius requirements and avoid sharp edges or staples that could damage the jacket and compromise the riser rating.