Gator 6077 Drum Sander Refill 80 Grit 3-pack

Product Description

The GATOR 6077 is an 80-grit drum sander refill sleeve designed for use with standard 1-inch by 3/4-inch drum sander mandrels mounted in a 1/4-inch electric drill. Each pack contains three replacement sleeves. The abrasive grain is secured with an advanced resin bonding system that holds the grit firmly to the backing under sustained friction and pressure, reducing premature grain shedding during sanding passes. These refills are suited for material removal and surface prep on wood, metal, fiberglass, and painted surfaces. Sold as a 3-pack, they are a practical consumable stock item for contractors, finish carpenters, and shop technicians who cycle through drum sander sleeves regularly.

These drum sander refill sleeves are appropriate for light to moderate stock removal and surface blending on a range of substrates. Common applications include deburring metal edges, shaping wood in tight contours, smoothing fiberglass layups, and feathering painted surfaces before refinishing. The 1/4-inch drill fit makes them compatible with standard corded and cordless drills commonly found on residential and light commercial job sites. They are a direct consumable replacement for worn drum sander sleeves of the same diameter and width specification.

Key Features

• 80-grit aluminum oxide abrasive for general-purpose stock removal and surface preparation
• Advanced resin bonding system locks grain to backing to extend sleeve life
• Fits 1-inch by 3/4-inch drum sander mandrels used with 1/4-inch electric drills
• Compatible with wood, metal, fiberglass, and painted surfaces
• 3-pack quantity reduces downtime from sleeve changes on active jobs

Compatibility

Designed to fit any 1/4-inch electric drill using a 1-inch by 3/4-inch drum sander mandrel. Specific mandrel brand compatibility was not provided; verify mandrel diameter and sleeve width before ordering.

Installation Notes

Installation is performed by sliding the sleeve over the rubber drum mandrel and expanding the mandrel with the locking screw until the sleeve is seated firmly with no slippage. Ensure the drill is unplugged or the battery is removed before changing sleeves. Inspect the rubber drum for wear or cracking before mounting a new sleeve, as a damaged drum will cause uneven abrasion and premature sleeve failure. Operate within the drill manufacturer's recommended RPM range for drum sander attachments.

Technical Specifications

• Grit: 80
• Sleeve Diameter: 1 inch
• Sleeve Width: 3/4 inch
• Compatible Chuck Size: 1/4 inch
• Pack Quantity: 3 sleeves
• Compatible Surfaces: Wood, metal, fiberglass, painted surfaces
• Weight: 0.125 pounds
• UPC: 00082354060770

Standard Information

• Brand: GATOR
• Manufacturer Part Number: 6077