Gardner Spring C38C Utility Compression Spring 0.375in Od

Product Description

The GARDNER SPRING C38C is a utility compression spring designed for general mechanical applications requiring consistent return force and load resistance. Built from steel with a zinc finish, this closed-end spring measures 0.375 inches outside diameter and 2 inches free length, with a wire diameter of 0.0476 inches. It delivers a spring rate of 15.72 pounds per inch and handles a maximum work load of 20.02 pounds. The solid height is 0.727 inches. Maintenance technicians, machine builders, and trade professionals install this type of spring in valves, latches, actuators, and light mechanical assemblies where repeatable compression force is required.

This spring suits a broad range of light-duty industrial and commercial applications. Its compact 3/8-inch OD profile fits standard spring pockets and retaining features found in HVAC damper linkages, plumbing valve assemblies, electrical enclosure latches, and general equipment mechanisms. The closed-end configuration provides stable seating on flat spring platforms without additional fixtures. Packaged in quantities of 12, it is well suited for service technicians stocking common hardware or for small-batch production builds.

Key Features

• Closed end type for flat, stable seating on spring platforms
• 0.375 inches outside diameter fits standard 3/8-inch spring pockets
• 15.72 pounds per inch spring rate for predictable, linear compression force
• 20.02-pound maximum work load suitable for light mechanical applications
• 0.727-inch solid height allows compact travel in shallow assemblies
• Zinc finish over steel construction provides corrosion resistance in typical indoor environments

Compatibility

Designed as a utility-grade compression spring for general mechanical assemblies including valve bodies, damper linkages, latches, and light equipment mechanisms requiring a 0.375-inch OD closed-end spring with a 2-inch free length.

Installation Notes

Installation is typically performed by mechanical technicians or trade professionals as part of a valve, linkage, or actuator assembly. Relieve all system pressure and de-energize any connected electrical or pneumatic circuits before accessing the spring location. Verify that the spring pocket depth and retaining bore diameter are compatible with the 0.375-inch OD and 2-inch free length before installation. Do not compress beyond the solid height of 0.727 inches during assembly or operation.