Gardner Spring 36419GS Precision Compression Spring

Product Description

The GARDNER SPRING 36419GS is a precision compression spring manufactured from stainless steel for reliable performance in demanding mechanical and industrial applications. It features a 0.36 inch outside diameter, a 2 inch free length, and a 0.0382 inch wire diameter. The spring delivers a 6.52 pound-per-inch spring rate with a maximum work load of 10 pounds (39.62 N). Closed and ground ends provide flat, stable seating and consistent load transfer. Maintenance technicians, mechanical assemblers, and industrial service professionals install this type of spring in equipment requiring precise, repeatable compression force.

This compression spring is suited for light-load precision applications across HVAC equipment, plumbing valves, electrical assemblies, and general mechanical systems. The 3/8 inch hole diameter fitment and 0.575 inch solid height make it appropriate for compact assemblies where accurate spring rate and controlled deflection are critical. It is packaged in quantities of 5, with a minimum order quantity of 1 package, making it practical for both service calls and small production runs.

Key Features

• Closed and ground ends for flat seating and uniform load distribution
• Stainless steel construction with plain finish resists corrosion in wet or high-humidity environments
• Precise 6.52 lb/in spring rate for controlled, repeatable compression force
• 10 pound maximum work load with 0.0382 inch wire diameter
• 0.575 inch solid height allows use in tight axial clearances
• Meets AISI 302, ASTM A228, and ASTM A313 material standards

Compatibility

Designed as an OEM-style precision compression spring for mechanical assemblies requiring a 0.36 inch outside diameter, 3/8 inch hole diameter, and 2 inch free length in stainless steel.

Installation Notes

Compression springs of this type are installed by mechanical technicians and industrial assemblers. Always de-energize and depressurize the host equipment before disassembling spring-loaded components. Verify that the bore or housing diameter and shaft clearance match the spring outside and inside diameter before installation. Avoid overcompressing the spring beyond its solid height of 0.575 inch, as doing so can permanently deform the coils and alter the spring rate.