Gardner Spring 36067G Precision Compression Spring

Product Description

The GARDNER SPRING 36067G is a precision compression spring manufactured from music wire (AISI 302 / ASTM A228 / ASTM A313) with a plain silver finish. It features a 0.36 inch outside diameter, a free length of 0.812 inches, and a wire diameter of 0.042 inches. With a spring rate of 28 lb/in and a maximum work load of 13.5 pounds, it is built to deliver consistent, repeatable force in tight-tolerance mechanical assemblies. Closed and ground ends ensure stable seating and accurate load transfer. This spring suits applications in HVAC equipment, plumbing valves, electrical components, and general industrial assemblies where precise spring force is required.

The 36067G is suited for residential and light commercial equipment, including valve mechanisms, actuators, solenoids, and control assemblies. Its compact profile and precision manufacturing make it a reliable choice in spring-loaded components found across HVAC, plumbing, electrical, and pool equipment. The 0.375 inch hole diameter fitment allows straightforward installation over standard guide pins or within standard bores. This spring is typically sourced by maintenance technicians, OEM repair depots, and mechanical assemblers working with spring-actuated components.

Key Features

• Precision compression spring with closed and ground ends for stable, flat seating
• Music wire construction meets AISI 302, ASTM A228, and ASTM A313 standards
• Spring rate of 28 lb/in for consistent, predictable force output
• Maximum work load rated at 13.5 pounds (60.05 N)
• Solid height of 0.306 inches keeps deflection range well defined
• Plain silver finish - suitable for dry or lightly lubricated environments

Compatibility

Designed as a precision OEM-style compression spring compatible with assemblies requiring a 0.36 inch outside diameter and a 0.375 inch guide hole, with a free length of 0.812 inches and a closed and ground end configuration.

Installation Notes

Compression springs should be installed by qualified technicians familiar with the host equipment. Always de-energize or isolate the system - including electrical power, fluid pressure, or pneumatic supply - before servicing any spring-loaded assembly. Confirm the spring is seated squarely on its guide pin or within its bore before reassembly to prevent lateral buckling under load. Do not compress the spring beyond its solid height during installation or testing.