G E Lighting 93130866 Led T8 Tube 15W 4 Foot 2 Pack

Product Description

The G E LIGHTING 93130866 is a 15-watt LED T8 tube lamp sold in a 2-pack, designed as a direct-wire (Type B) replacement for 32-watt fluorescent T8 lamps. Each lamp features a glass T8 shape with a G13 base and a maximum overall length of 48 inches. A three-position switch on the lamp body allows the installer to select correlated color temperature at 4000K, 5000K, or 6500K without changing the fixture or lamp. Output is rated at 1800 lumens per lamp with a Color Rendering Index of 80. The lamp is non-dimmable and carries a rated life of 50,000 hours. Electricians and lighting maintenance technicians install this lamp in commercial, industrial, and institutional fluorescent fixtures retrofitted for direct-wire LED operation.

This lamp is suited for retrofit applications in 4-foot strip fixtures, troffers, and shop lights where the ballast is being bypassed for a direct-wire LED conversion. The selectable color temperature range covers cool white through daylight output, making the lamp adaptable to warehouses, garages, retail backrooms, and office spaces. The Type B direct-wire configuration eliminates ballast dependency, reducing future maintenance costs. The 2-pack quantity is appropriate for single-fixture replacements requiring two lamps.

Key Features

• Selectable color temperature: 4000K, 5000K, or 6500K via switch on lamp body
• 15 watts per lamp, equivalent output to a 32-watt fluorescent T8
• 1800 lumens per lamp with CRI of 80
• Type B direct-wire operation — no ballast required
• Non-dimmable; rated life of 50,000 hours
• Glass T8 form factor with G13 base, 48-inch maximum overall length

Compatibility

Designed as a direct-wire (Type B) LED replacement for standard 4-foot T8 fluorescent lamps in fixtures wired for ballast-bypass operation. Replaces 32-watt T8 fluorescent lamps. Compatible model referenced in product data: LED15BDT8G-4-3CC-2T.

Installation Notes

Type B direct-wire installation requires bypassing or removing the existing ballast and rewiring the fixture to supply line voltage directly to the lamp sockets. This work must be performed by a qualified electrician in accordance with NEC requirements and the fixture manufacturer's ballast-bypass instructions. De-energize the circuit and verify zero voltage at the fixture before beginning any wiring work. Do not install in dimmable circuits — the lamp is rated non-dimmable.