G E Lighting 93120809 Led MR16 5.5W GU10 Flood Bulb 3000K

Product Description

The G E LIGHTING 93120809 is a 5.5-watt LED MR16 flood light bulb with a GU10 base, delivering 385 lumens at a 3,000 Kelvin color temperature for a warm, bright white light output. It replaces a 50-watt incandescent lamp while drawing a fraction of the energy. The narrow 20-degree beam angle makes it well suited for directional accent and display lighting. With a rated life of 25,000 hours, it is designed to reduce relamping frequency in commercial and residential settings. The bulb is dimmable and carries an Energy Star rating. Electricians and lighting contractors install this type of fixture lamp in track heads, recessed cans, and display fixtures.

This bulb is packaged in a quantity of three per card. The GU10 twist-lock base is a common format found in track lighting systems, recessed downlights, and under-cabinet fixtures used in retail, hospitality, and residential applications. The 20-degree flood beam suits focused task and accent lighting scenarios where light spillover must be controlled. The 3,000 Kelvin output provides a neutral warm white appearance consistent with the color rendering expectations of display and retail environments. A CRI of 80 ensures adequate color accuracy for most general commercial and residential applications.

Key Features

• 5.5-watt LED replaces 50-watt incandescent, reducing energy draw by roughly 89 percent
• 385 lumens output with a 20-degree beam angle for directional flood coverage
• 3,000 Kelvin warm white color temperature with a CRI of 80
• Dimmable with compatible GU10 dimmer controls
• 25,000-hour rated life supporting a 22-year service estimate
• Energy Star approved

Compatibility

Designed as a direct GU10 twist-lock base replacement for MR16-format LED and halogen flood lamps in track lighting, recessed cans, and display fixtures that accept a GU10 socket.

Installation Notes

Installation of GU10 base lamps is typically performed by licensed electricians or qualified maintenance personnel. Always shut off power at the breaker or switch before replacing a lamp or servicing the fixture. Insert the GU10 base pins into the socket and rotate to lock; do not force. Verify that the dimmer switch installed in the circuit is rated for LED loads to maintain proper dimming performance and prevent flicker.