Freud FB-013 Forstner Bit 1-3/4 in High Speed Steel

Product Description

The FREUD FB-013 is a 1-3/4 inch Forstner bit from the Diablo Series, engineered for clean, precise hole drilling in wood and most wood-based products. Constructed from high speed steel, it delivers consistent cutting performance across a range of wood types. The sharp center spur accurately locates the center of the hole before the cutting rim engages, reducing wandering and tear-out. This bit is suited for flat-bottom holes, pocket holes, and overlapping holes where a standard twist bit would not perform adequately. Woodworkers, cabinetmakers, and general contractors reach for Forstner bits when clean edges and a flat hole floor are required.

This bit is used in residential and light commercial woodworking applications, including cabinet installation, furniture fabrication, and door hardware prep. It handles solid wood, plywood, MDF, particleboard, and similar engineered wood panels. The 3/8 inch shank fits standard drill chucks and drill press chucks, making it compatible with handheld drills and bench-mounted drill presses. It is particularly effective when used in a drill press, which keeps the bit perpendicular and allows controlled feed pressure for cleaner results.

Key Features

• 1-3/4 inch cut diameter for large-diameter flat-bottom holes
• High speed steel construction for durable, repeatable cutting performance
• Sharp center spur accurately locates hole center before rim cutting begins
• Designed for flat-bottom holes, pocket holes, and overlapping hole patterns
• 3/8 inch shank fits standard drill and drill press chucks
• Part of the Diablo Series lineup

Compatibility

Designed as an OEM-style replacement or direct-use Forstner bit for handheld drills and drill presses equipped with a standard 3/8 inch or larger chuck, suitable for use in wood and most wood-composite products.

Installation Notes

Installation of this bit is performed by woodworkers, carpenters, and general contractors using a handheld drill or drill press. Secure the 3/8 inch shank firmly in the chuck before use and confirm the workpiece is clamped or secured to prevent rotation. For best results and cleanest hole edges, use a drill press at a controlled feed rate rather than a handheld drill. Always wear appropriate eye protection when drilling.