Freud DSP2090-P2 Spade Bit 3/4x6 Inch 2-pack

Product Description

The FREUD DSP2090-P2 is a 2-pack of Speed Demon spade bits sized at 3/4 inch diameter by 6 inches in length, designed for fast, clean hole drilling in wood. The speed-tip point self-feeds into the material, reducing the force required and increasing drilling speed compared to conventional spade bits. An optimized curved paddle geometry accelerates chip evacuation, which helps maintain drilling performance across an extended number of holes per battery charge. The shank is impact-rated for use in both cordless and corded impact drivers and standard drill drivers.

These spade bits are suited for residential and light commercial rough-in work where large-diameter holes are needed through wood framing, sheathing, and similar substrates. Electricians, plumbers, and HVAC techs running wire, pipe, or ductwork through wood stud bays will find the self-feeding tip and aggressive chip clearance useful in production drilling applications. The 6-inch length provides reach through standard dimensional lumber and double-stacked framing members.

Key Features

• Self-feeding speed-tip point reduces operator push force and increases hole-making speed
• Curved paddle design improves chip evacuation for sustained performance per battery charge
• Impact-rated shank compatible with cordless and corded impact drivers and drill drivers
• 3/4 inch cutting diameter for standard rough-in hole sizes
• 6-inch length provides reach through thick or doubled framing members
• 2-pack quantity reduces downtime when a bit dulls mid-job

Compatibility

Designed for use in standard 1/4-inch hex-shank impact drivers and 3/8-inch or 1/2-inch chuck drill drivers, corded or cordless, for drilling holes in wood and wood-based materials.

Installation Notes

These bits are installed and used by electricians, plumbers, and HVAC technicians during rough-in phases. Ensure the driver chuck or collet is fully seated and locked on the shank before operation. When drilling near structural members, follow applicable building codes regarding hole placement and minimum edge distances. Wear appropriate eye protection during use, as spade bits eject chips at high velocity.