Freud DSP2070-P2 Spade Bit 5/8 X 6 Inch 2 Pack

Product Description

The FREUD DSP2070-P2 is a two-pack of 5/8 inch by 6 inch Speed Demon spade bits engineered for fast, clean boring in wood. The speed-tip point self-feeds into the material, reducing the force required to drive the bit and increasing overall hole-making speed compared to conventional spade bit designs. A curved paddle geometry accelerates chip evacuation, keeping the flutes clear so each hole clears faster and battery charge goes further on cordless tools. The shank is impact-rated for use in both cordless and corded impact drivers and standard drill drivers, reducing flex and breakage under high-torque applications.

These bits are suited for residential and light commercial rough-in work where trades need to bore through framing, blocking, joists, and plates quickly. Electricians running conduit or cable, plumbers routing supply and drain lines through wood framing, and HVAC technicians boring penetrations for refrigerant lines or duct connections will find the 6 inch length useful for reaching through deeper members. The 5/8 inch diameter covers common cable and small-pipe pass-through applications. Sold as a two-pack, making them practical to keep a spare on the job.

Key Features

• Self-feeding speed-tip point reduces push force and increases boring speed vs. traditional spade bits
• Curved paddle design accelerates chip evacuation for more holes per battery charge
• Impact-rated shank construction handles both cordless impact drivers and corded drill drivers
• 5/8 inch diameter suits common cable, conduit, and small-pipe pass-through boring
• 6 inch length reaches through standard framing members and deeper blocking
• Two-pack provides a ready backup on the job

Compatibility

Designed for use in standard 3/8 inch or 1/2 inch chuck cordless and corded drill drivers and impact drivers. Suitable for boring through softwood and hardwood framing typical in residential and light commercial construction.

Installation Notes

Installation is performed by electricians, plumbers, and HVAC technicians during rough-in phases. Confirm the bit is fully seated in the chuck and the chuck is tightened before use. When boring through framing near electrical wiring or plumbing, verify the path is clear to avoid contact with existing utilities. Follow applicable code requirements such as NEC or IPC for hole placement and framing notch or bore restrictions.