Freud DCS323100010W 1000 Grit Sanding Sheets 10 Pack

Product Description

The FREUD DCS323100010W is a 10-pack of Diablo 1/3-sheet wet or dry sanding sheets sized 9 inches x 3-2/3 inches at 1000 grit. These sheets are engineered for fine finishing work on lacquers, primers, sealers, plastics, and paints. The 1000-grit abrasive is suited for final coat preparation or between-coat sanding where surface smoothness is critical. Wet or dry compatibility gives the installer flexibility depending on the substrate and finish system in use. Each pack contains 10 sheets, making it a practical stocking item for finishing crews and service techs who cycle through abrasives regularly.

These sanding sheets are used in light finishing applications across residential and commercial work. They are well suited for flat surfaces and can be used by hand or with a standard 1/3-sheet sanding block. Common applications include final sanding of painted or primed surfaces, prep work on plastic components, and between-coat smoothing on lacquer or sealer finishes. Their wet or dry rating makes them adaptable to waterborne and solvent-based finish systems.

Key Features

• 1000-grit abrasive for fine final-coat and between-coat sanding
• Wet or dry rated for use with waterborne and solvent-based systems
• Sheet size: 9 inches x 3-2/3 inches, standard 1/3-sheet format
• Compatible for hand sanding or use with a sanding block on flat areas
• Suitable for lacquers, primers, sealers, plastics, and paints
• 10 sheets per pack for efficient stocking and job-site use

Compatibility

Designed for use as a 1/3-sheet abrasive in hand-sanding and sanding block applications on flat surfaces across a range of finish materials.

Installation Notes

These sheets are installed by hand or into a standard 1/3-sheet sanding block — no power tools required. When sanding between coats, allow the previous coat to fully cure per the finish manufacturer's specifications before abrading. For wet sanding, use appropriate ventilation and dispose of slurry in accordance with local environmental guidelines. Do not apply excessive pressure, as 1000-grit abrasives can cut through thin finish coats quickly.