Forney Industries Inc 71802 Type 1 Cutting Wheel 4.5in

Product Description

The FORNEY INDUSTRIES INC 71802 is a Type 1 aluminum oxide cutting wheel designed for use on right angle grinders. Measuring 4.5 inches in diameter and 0.040 inches thick with a 7/8 inch arbor, this thin-kerf wheel is built for straight, aggressive cuts through ferrous metals. The aluminum oxide abrasive construction makes it well-suited for metal cutting, metal abrasion, bodywork, and general metal fabrication tasks where a clean cut profile and controlled material removal are required. Each package contains 25 wheels, making it a practical stocking item for shops and field service kits.

This cutting wheel is intended for ferrous material applications including structural steel, sheet metal, pipe, and fabricated components. It is appropriate for professional metalworkers, welders, fabricators, and maintenance technicians who perform body work, repair work, and production cutting tasks. The wheel is sold in a 25-unit package, which suits both single-job restocking and ongoing shop inventory needs. It is rated exclusively for right angle grinder use and should not be mounted on any other tool type.

Key Features

• 4.5 inch diameter with 0.040 inch thin-kerf profile for fast, low-resistance cuts
• 7/8 inch arbor size for standard right angle grinder compatibility
• Aluminum oxide abrasive for effective cutting on ferrous metals
• Type 1 flat wheel geometry designed for straight cut-off operations
• Suitable for metal cutting, abrasion, bodywork, and metal fabrication
• Packaged in quantities of 25 for shop and field stocking

Compatibility

Designed for use on right angle grinders only with a 7/8 inch arbor. Intended for cutting and abrading ferrous materials. Not rated for use on non-ferrous metals, masonry, or other non-ferrous substrates, and must not be mounted on tools other than right angle grinders.

Installation Notes

Mounting and replacement of abrasive cutting wheels should be performed by a qualified operator following the grinder manufacturer's instructions and applicable ANSI B7.1 safety standards. Always power down and disconnect the grinder before changing wheels. Inspect the wheel for cracks or chips before each use and never exceed the maximum RPM rating marked on the wheel. Wear appropriate PPE including eye protection and gloves during installation and operation.