Fluke FLK-V3000FC Kit Fc Wireless Ac Voltage Kit 7pc

Product Description

The FLUKE FLK-V3000FC KIT is a seven-piece wireless AC voltage measurement kit built around the Fluke 3000 FC Series Wireless Multimeter and the Fluke v3000 AC Voltage Module. The kit measures AC and DC current up to 400 milliamps, handles voltages up to 1,000 volts, and resolves readings to 6,000 counts on an LCD display. Resistance measurement reaches 600 ohms, capacitance extends to 9,999 microfarads (uF), and the frequency counter tops out at 100 Hz. Licensed electricians and HVAC technicians use this kit for panel-level diagnostics, equipment commissioning, and system troubleshooting where wireless data capture reduces repeated trips to the meter.

This kit is suited for both commercial and residential electrical and HVAC service work. The wireless FC architecture lets a technician place the voltage module at the measurement point while reading data remotely on the multimeter. Typical applications include branch circuit testing, motor circuit analysis, and HVAC control voltage verification. The operating temperature range of -10 degrees C to 50 degrees C makes it practical for outdoor service calls and unconditioned mechanical spaces.

Key Features

• Wireless Fluke v3000 AC Voltage Module pairs with the Fluke 3000 FC Series Multimeter for remote readings
• 1,000-volt AC maximum voltage rating with CAT III 1000 V and CAT IV 600 V safety ratings
• 400 mA AC and 400 mA DC current measurement capability
• 6,000-count LCD display with capacitance measurement to 9,999 uF
• Seven-piece kit includes AC175 Alligator Clips, AC285 Alligator Clips, TL175 Test Leads, TL224 Test Leads, and a Magnetic Hanging Strap
• Meets ANSI/ISA 61010-1, EN/IEC 61010-1, UL 61010-1, CSA, CE, and FCC standards

Compatibility

Designed for use within the Fluke 3000 FC Series wireless measurement ecosystem; the included modules and accessories are intended for use together as a matched kit.

Installation Notes

Installation and use of this kit should be performed by a qualified electrician or licensed HVAC technician familiar with CAT III and CAT IV measurement safety practices. De-energize and lock out circuits where possible before connecting test leads, and confirm probe and lead condition before each use. Follow NEC and applicable local electrical codes when performing measurements on energized panels or branch circuits. Do not exceed the rated voltage or current limits of any individual accessory included in the kit.