Falltech 8077FDQC-M Nomex Full Body Harness Medium

Product Description

The FALLTECH 8077FDQC-M is an arc-rated full body harness built for climbing applications where both fall protection and electrical hazard resistance are required. Constructed with Nomex webbing, this harness is designed for workers in environments where arc flash exposure is a concern. It features a non-belted configuration with one dorsal D-ring plus a front D-ring, quick-connect buckles at the legs and chest, and a dielectric build that avoids conductive metal hardware in critical connection points. This harness is sized for Medium and is intended for installation and service professionals working near energized equipment at height.

This harness is suited for commercial and industrial climbing applications, including utility work, electrical construction, and tower or structure climbing where arc flash and fall hazards are present simultaneously. The non-belted design keeps the profile clean for confined or restricted climbing environments. The quick-connect leg and chest buckles allow for faster donning and doffing, which is practical on jobsites where harnesses are put on and removed frequently throughout a shift.

Key Features

• Nomex webbing construction provides arc flash resistance for work near energized equipment
• Dielectric design minimizes conductive hardware to reduce electrical hazard exposure
• Dual attachment points: one dorsal D-ring plus one front D-ring for climbing and positioning versatility
• Quick-connect buckles at legs and chest for efficient donning and doffing
• Non-belted configuration suited to climbing and restricted-space applications
• Medium sizing for consistent fit and load distribution during fall arrest

Compatibility

Designed as an OEM-style replacement or direct-fit harness for Medium-sized users requiring arc-rated full body fall protection in climbing applications. Consult applicable ANSI Z359 and NFPA 70E standards for system compatibility when pairing with lanyards, self-retracting lifelines, or other connectors.

Installation Notes

Harness fitting and inspection should be performed by a competent person per ANSI Z359 fall protection standards before each use. Inspect all webbing, buckles, and D-rings for wear, heat damage, or contamination prior to donning. Quick-connect buckles must be fully engaged and audibly clicked before entering a work area at height. Do not modify the harness webbing or hardware, and retire the harness immediately following a fall arrest event.