Fairlane CTH-0510 Positioning Gripper 1/2-13 Hex Head

Product Description

The FAIRLANE CTH-0510 is a carbide-tipped adjustable positioning gripper designed to hold workpieces securely during fixturing, machining, and assembly operations. It features a serrated fine-tooth pattern that bites into the workpiece surface to resist movement under load. The hex head design allows for easy installation and adjustment using standard tooling. A black oxide finish provides corrosion resistance in shop environments. Thread size is 1/2-13, with a 1-inch shank length and 1-inch thread length. Pad diameter measures 5/8 inches, hex across-flats measures 3/4 inches, and head height is 23/64 inches.

This gripper is suited for use in industrial workholding fixtures, jigs, and positioning setups across manufacturing environments. It is commonly installed in machine shops, fabrication facilities, and production lines where repeatable part location is required. The carbide-tipped pad provides durability for high-cycle applications where softer tip materials would wear prematurely. The adjustable design accommodates varying workpiece heights within a fixture assembly.

Key Features

• Carbide-tipped pad for extended wear life in high-cycle fixturing applications
• Serrated fine-tooth pattern grips workpiece surface and resists lateral movement
• Hex head design accepts standard wrenches for quick installation and torque adjustment
• Black oxide finish improves corrosion resistance in industrial shop environments
• 1/2-13 thread size compatible with standard fixturing hardware and tooling plates
• Compact head profile with 23/64-inch head height for use in low-clearance setups

Compatibility

Designed as a standard adjustable positioning gripper for use in industrial workholding fixtures and jig assemblies accepting 1/2-13 threaded components.

Installation Notes

Installation is performed by qualified tooling or fixture technicians using standard hex wrenches sized to the 3/4-inch hex. Ensure the mating threaded bore in the fixture plate is clean and properly tapped to 1/2-13 before installation. Do not overtighten against the workpiece surface, as the carbide tip can damage soft workpiece materials if excessive clamping force is applied. Verify gripper engagement and workpiece seating before initiating any machining or assembly cycle.