Ergodyne 25433 Hi-vis Rain Suit Kit Class 3 Medium Lime

Product Description

The ERGODYNE 25433 is the GloWear 8376K lightweight hi-vis rain suit kit, a two-piece waterproof ensemble consisting of the 8366 rain jacket and 8916 rain pants. Built for workers who need full ANSI/ISEA 107 Type R Class 3 high-visibility compliance in wet conditions, the suit is constructed from 150-denier polyester oxford with a PU coating and fully taped, bonded seams to block water intrusion. The jacket features a vented cape-back for breathability and an attached drawstring hood that stows away when not in use. Two inches of reflective tape provides low-light and nighttime visibility. Licensed contractors, utility crews, and safety managers specify this kit where both waterproofing and visibility compliance are required.

This rain suit is intended for outdoor workers in road construction, utilities, general construction, emergency response, airline ground operations, railway maintenance, and survey crews. The kit fits over standard workwear without restricting movement. The jacket meets ANSI/ISEA 107 Type R Class 3. The pants meet ANSI 107 Supplemental Class E standards. Worn together, the full suit satisfies ANSI/ISEA 107 Type R Class 3 requirements. This makes the 25433 a go-to kit where a single garment set must meet both upper-body and lower-body visibility standards on regulated jobsites.

Key Features

• Fully waterproof 150-denier polyester oxford shell with PU coating
• Fully taped and bonded seams lock out water at every stitch line
• ANSI/ISEA 107 Type R Class 3 compliant jacket; pants meet ANSI 107 Supplemental Class E
• 2-inch reflective tape for enhanced low-light and nighttime visibility
• Vented cape-back on jacket allows heat and moisture to escape
• Snap cuffs on pant legs for easy on and off over boots; elastic waistband for fit
• Jacket includes two lower-front pockets with snap flaps, a chest cell phone pocket, and a clear ID holder
• Concealed drawstring hood stows away when not needed

Compatibility

Designed as an OEM-style matched kit pairing the GloWear 8366 rain jacket with the GloWear 8916 rain pants, sized Medium, for use as a complete ANSI/ISEA 107 Type R Class 3 compliant hi-vis rain suit system.

Installation Notes

This garment is donned and removed by the end user and does not require tool-based installation. Safety supervisors and PPE managers should verify that garment size and visibility class meet applicable jobsite safety plans and regulatory requirements before issuing. Inspect reflective tape and seam integrity before each use, and retire the suit if tape adhesion or waterproof coating is compromised. Launder and store per manufacturer care instructions to maintain waterproof and reflective performance.