Ergodyne 23977 Hi-vis Thermal Work Jacket Class 2 3XL

Product Description

The ERGODYNE 23977 is the GloWear 8275 hi-vis thermal workwear jacket, a midweight insulated outer layer built for cool to cold working conditions. The shell is 150-denier polyester twill with a wind- and water-resistant PU coating for all-day dryness. The body and hood are lined with 280G sherpa for sustained warmth, while the sleeves use 40GM quilted insulation to maintain mobility at the shoulders. Black panels on the front and arms resist visible soiling from dirt, dust, and sweat. The jacket meets ANSI/ISEA 107-2020 Type R Class 2 requirements, making it appropriate for roadway, utility, and construction worksites where daytime and nighttime visibility is required. Licensed electricians, linemen, utility workers, and general construction crews are the primary installers and wearers.

This jacket is designed for outdoor trade workers who need compliant hi-vis outerwear in cool to cold environments. The large hood is sized to pull over a hard hat, which is a critical feature for construction and utility applications. Gusseted shoulders allow a full range of arm motion for overhead and physically demanding tasks. The long tail design prevents ride-up during bending and lifting. Rib knit cuffs, an elastic bungee waist, and a drawstring hood allow workers to seal out cold air for a custom fit. The zippered front closure with snap buttons allows fast on-and-off when moving between indoor and outdoor work zones.

Key Features

• ANSI/ISEA 107-2020 Type R Class 2 compliant with fluorescent lime material and 2-inch reflective tape for nighttime conspicuity
• 150-denier polyester twill shell with PU coating for wind and water resistance
• 280G sherpa lining on body and hood plus 40GM quilted insulation in sleeves for layered warmth
• Hood sized to fit over hard hats for compliant headwear compatibility on active job sites
• Gusseted shoulders allow unrestricted arm and shoulder movement during physical work
• Six exterior pockets (2 lower slash, 2 lower snap, 2 chest) plus 2 interior pockets (1 hook-and-loop, 1 zippered) and a D-ring for key or clip access
• Machine washable construction for easy field maintenance

Compatibility

Designed as an ANSI/ISEA 107-2020 Type R Class 2 compliant hi-vis outer layer for trade professionals working in roadway, utility, and construction environments requiring enhanced worker visibility.

Installation Notes

This garment is worn as a hi-vis outer layer by trade workers on compliant worksites. Before donning, verify that the reflective tape and fluorescent panels are clean and undamaged, as soiling or damage can reduce conspicuity and affect jobsite compliance. Launder per the care label instructions to maintain the PU coating performance and garment compliance ratings. Inspect the jacket regularly for tears or degraded reflective tape, and retire it from hi-vis duty if compliance markings are compromised.