Epc A204 Draft Inducer Motor 115V 1 Speed

Product Description

The EPC A204 is a draft inducer motor designed to move combustion gases through heat exchanger flue passages and out of the venting system in gas-fired heating equipment. Operating at 115 volts with a single-speed configuration, this motor drives the inducer blower assembly that creates the negative pressure needed to pull flue gases through the heat exchanger before the burner fires. It is a direct-replacement component typically installed by licensed HVAC technicians during routine service or system repair. The single-speed design keeps installation straightforward, with no multi-tap wiring complexity to manage on the bench or in the field.

Draft inducer motors of this type are found in residential and light-commercial gas furnaces and boilers where induced-draft or direct-vent combustion systems are used. The A204 is suited for applications where the original motor has failed due to bearing wear, winding failure, or housing damage. Installers typically encounter this part during heating season service calls when the furnace fails to start or throws a pressure-switch fault caused by inducer failure. No specific model compatibility data was provided with this listing.

Key Features

• 115-volt single-phase operation for standard residential power supply compatibility
• Single-speed motor simplifies wiring and direct swap-out on replacement jobs
• Designed for induced-draft and direct-vent combustion gas venting applications
• OEM-style replacement form factor for efficient field installation

Compatibility

Designed as an OEM-style replacement draft inducer motor for residential and light-commercial gas furnaces and boilers using induced-draft venting systems.

Installation Notes

Draft inducer motor replacement is performed by licensed HVAC technicians. Disconnect all power to the furnace and shut off the gas supply before beginning disassembly. The inducer housing, pressure switch tubing, and flue connections must be fully reseated and verified leak-free after installation. Always confirm proper inducer rotation direction and pressure-switch operation before returning the system to service.

Technical Specifications

• Voltage: 115 volts
• Speeds: 1

Standard Information

• Brand: EPC
• Manufacturer Part Number: A204