Emtek C5210STUUS19 Stuttgart Privacy Lever Flat Black

Product Description

The EMTEK C5210STUUS19 is a Stuttgart-style privacy lever set finished in Flat Black, designed for interior doors that require a locking function without a keyed cylinder. The set includes a square rose and a privacy mechanism with a 2-3/8 inch backset, making it compatible with standard interior door prep. The lever and rose assembly fits doors ranging from 1-3/8 inches to 1-3/4 inches in thickness. Licensed locksmiths, carpenters, and finish contractors install this type of hardware during new construction or renovation work. The Flat Black finish provides a consistent, matte appearance suited to modern and transitional interior design schemes.

This lever set is intended for interior privacy applications such as bathrooms, bedrooms, and home offices where a turn-button or push-button lock is needed from the inside without keyed access from the outside. The Stuttgart lever style pairs with a square rose plate for a clean, geometric profile. The included CF (Clutch Function) privacy mechanism allows emergency release from the exterior side using a small tool or coin, a common requirement in residential privacy door hardware. The 2-3/8 inch backset suits the majority of standard interior door bore preparations found in residential construction.

Key Features

• Stuttgart lever profile with square rose in Flat Black finish
• Privacy function with CF mechanism for interior locking and emergency exterior release
• 2-3/8 inch backset fits standard interior door preparations
• Compatible with door thicknesses from 1-3/8 inches to 1-3/4 inches
• Sold as a single assembled unit; no additional components required for basic installation

Compatibility

Designed as an OEM-style privacy lever set for interior residential doors with a standard 2-1/8 inch bore and 2-3/8 inch backset, fitting door thicknesses between 1-3/8 inches and 1-3/4 inches.

Installation Notes

Installation is typically performed by a finish carpenter or licensed locksmith. Confirm the door bore diameter and backset measurement before installation to ensure proper latch alignment with the strike plate. Disengage any existing hardware and verify the door thickness falls within the 1-3/8 inch to 1-3/4 inch range before mounting the rose and lever assembly. Follow the manufacturer-included instructions for CF mechanism alignment to ensure the privacy function and emergency release operate correctly.