Emtek 7111CRMBLH Cimarron Lever Passage Set Medium Bronze

Product Description

The EMTEK 7111CRMBLH is a left-hand Cimarron lever passage set designed for interior doors where latching without locking is required. It ships with a Style 6 rose and is configured for a 2-3/8 inch backset. The set is finished in Medium Bronze and fits doors ranging from 1-3/8 inches to 2 inches thick. Passage sets in this configuration are a standard specification for hallway and closet doors in residential construction and light commercial interiors. Each unit is assembled to order at the manufacturer's Southern California facility.

This passage set is suited for interior residential doors such as hallways, closets, and common areas where a keyed lock is not required. The left-hand configuration addresses specific door swing orientations, and the Style 6 rose provides a defined decorative profile to complement period and transitional interior design themes. The Medium Bronze finish coordinates with a wide range of interior hardware and fixture finishes common in residential renovation and new construction work.

Key Features

• Left-hand lever orientation for correct operation on left-swing doors
• 2-3/8 inch backset fits standard interior door prep
• Fits door thickness range of 1-3/8 inches to 2 inches
• Passage function — no locking mechanism, latches only
• Style 6 rose included for a clean, defined mounting profile
• Medium Bronze finish for consistent hardware coordination

Compatibility

Designed as an OEM-style passage set for interior residential doors with a standard 2-3/8 inch backset prep and a door thickness between 1-3/8 inches and 2 inches.

Installation Notes

Installation is typically performed by a finish carpenter, door hardware installer, or experienced DIYer. Before installing, confirm door hand orientation and verify the existing bore and backset dimensions match the hardware. Ensure the door edge prep accepts a standard latch and that the strike plate is aligned with the latch bolt centerline. No special tools beyond a screwdriver and a tape measure are required for a standard installation on a pre-bored door.