Emtek 5210DTUS19RH Dumont Lever Privacy Set Flat Black

Product Description

The EMTEK 5210DTUS19RH is a right-hand Dumont lever privacy set finished in Flat Black, designed for interior doors where passage control and a consistent design aesthetic are both required. The set includes a square rose and is configured for a 2-3/8 inches backset, fitting doors ranging from 1-1/4 inches to 2 inches in thickness. The privacy function allows locking from one side without a keyed cylinder, making it well suited for bathrooms and bedrooms. Installation is typically handled by finish carpenters, general contractors, or experienced remodelers working on residential interior door hardware.

This lever set is intended for interior privacy applications in residential settings. The right-hand configuration suits doors where the hinge is on the left when facing the door from the exterior side. The square rose provides a clean, geometric frame around the lever at the door face. The Flat Black finish coordinates with contemporary and transitional interior design schemes. The 2-3/8 inches backset is the most common residential backset dimension and fits standard pre-bored door preparations.

Key Features

• Privacy function — locks from inside without a keyed cylinder, standard for bathrooms and bedrooms
• Right-hand orientation for correct lever return and latch direction
• 2-3/8 inches backset fits standard residential pre-bored door preparations
• Compatible with door thickness range of 1-1/4 inches to 2 inches
• Square rose design for a clean geometric appearance at the door face
• Flat Black finish for contemporary and transitional interiors

Compatibility

Designed as an OEM-style privacy lever set for standard residential interior doors with a 2-1/8 inches bore hole and a 2-3/8 inches backset, accommodating door thicknesses from 1-1/4 inches to 2 inches.

Installation Notes

Installation is performed by finish carpenters or experienced remodelers. Ensure the door is pre-bored to the correct 2-1/8 inches cross-bore diameter and that the edge bore aligns with the 2-3/8 inches backset before fitting the latch. Confirm right-hand handing before installation, as handing cannot typically be reversed on a configured lever set. No special tools beyond a standard screwdriver are required for final assembly on a properly prepared door.