Emtek 5209STUUS10BRH Stuttgart Lever Privacy Oil Rubbed Bronze

Product Description

The EMTEK 5209STUUS10BRH is a Stuttgart lever privacy set in an Oil Rubbed Bronze finish, configured for right-hand door swing with a 2-3/8 inch backset. The set includes a Disk Rose and is sized to fit doors ranging from 1-1/4 inches to 2 inches thick. It is a privacy function lockset, meaning it latches and locks from the inside without a keyed cylinder — standard for bedrooms and bathrooms. Licensed contractors, finish carpenters, and experienced remodelers install this hardware as part of interior door finish-out work.

This privacy lever set is intended for interior residential doors where a turn-button or push-button lock is required on one side and emergency release access is needed from the other. The Stuttgart lever style pairs with the included Disk Rose for a clean, minimal profile. The Oil Rubbed Bronze finish suits transitional and traditional interior design schemes. Suitable for doors 1-1/4 inches to 2 inches thick with a 2-3/8 inch backset. Sold as a single unit.

Key Features

• Privacy function — interior lock with no keyed cylinder, includes emergency release
• Right-hand configuration for correct lever orientation on right-hand doors
• 2-3/8 inch backset fits standard interior door prep
• Disk Rose included — low-profile round rosette for a clean finish
• Compatible with doors 1-1/4 inches to 2 inches thick
• Oil Rubbed Bronze finish for traditional and transitional interiors

Compatibility

Designed as a privacy lever replacement or new-install set for interior residential doors measuring 1-1/4 inches to 2 inches in thickness with a standard 2-3/8 inch backset bore, right-hand swing.

Installation Notes

Installation is typically performed by a licensed finish carpenter, contractor, or experienced DIYer using a drill, hole saw, and chisel for mortising the latch plate. Verify door hand orientation before ordering — this set is right-hand only. Confirm the existing or planned bore is prepped for a 2-3/8 inch backset before installation. Power down any associated door alarm or access-control circuits before beginning work on the door assembly.