Emtek 5112STUUS10BLH Stuttgart Lever Passage Left Hand

Product Description

The EMTEK 5112STUUS10BLH is a Stuttgart lever passage set in an Oil Rubbed Bronze finish, designed for interior doors that require latch function without a locking mechanism. The set includes a left-hand lever mounted on a Modern Rectangular Rose and is configured for a 2-3/8 inch backset. The Stuttgart lever profile delivers a clean, architectural look suited to contemporary and transitional interiors. Passage sets of this type are standard installations for hallway doors, closets, and other interior openings where privacy hardware is not required. Licensed contractors and finish carpenters typically handle this type of door hardware installation.

This passage set is intended for doors ranging from 1-1/4 inches to 2 inches in thickness, covering the full range of standard residential and light commercial interior door stock. The left-hand configuration accommodates hinged doors where the hinge is on the right side when facing the pull side of the door. The Modern Rectangular Rose provides a low-profile, square-edged escutcheon that pairs cleanly with contemporary door and casing profiles. The Oil Rubbed Bronze finish provides a dark, muted tone that coordinates with a wide range of interior hardware and fixture finishes.

Key Features

• Passage function — latch operation with no locking mechanism, suited for hallways and closets
• Left-hand lever orientation for correct operation on the specified handing
• 2-3/8 inch backset accommodates standard interior door prep
• Modern Rectangular Rose for a clean, low-profile escutcheon aesthetic
• Compatible with door thicknesses from 1-1/4 inches to 2 inches
• Oil Rubbed Bronze finish for a dark, understated appearance

Compatibility

Designed for interior doors from 1-1/4 inches to 2 inches thick with a standard 2-3/8 inch backset bore. Verify door handing before ordering — this unit is configured left-hand only.

Installation Notes

Installation is typically performed by a finish carpenter or licensed contractor. Shut off any powered door systems before beginning work. Confirm door handing, backset measurement, and cross-bore diameter match the hardware before installation. Follow the manufacturer's template for bore placement to ensure proper latch and rose alignment.