Emtek 5110HLOUS10BLH Helios Lever Passage Left Hand

Product Description

The EMTEK 5110HLOUS10BLH is a left-hand Helios lever passage set in Oil Rubbed Bronze finish, designed for interior doors that do not require locking hardware. This unit ships with a square rose and a 2-3/8 inch backset, fitting doors ranging from 1-1/4 inches to 2 inches in thickness. The passage function allows free movement through a door without a latch lock, making it appropriate for hallways, closets, and open living spaces. Installation is handled by carpenters, finish contractors, or door hardware specialists familiar with lever-set mortising and rose alignment on pre-bored door preps.

This passage lever set is suited for residential interior applications where a consistent design aesthetic is required across multiple doors. The Helios lever profile pairs with the included square rose to create a clean, architectural look in Oil Rubbed Bronze. It is assembled to left-hand door configuration. Doors in the 1-1/4 inch to 2 inch thickness range are compatible with this unit as delivered.

Key Features

• Left-hand lever orientation for correct installation on left-hand swing doors
• 2-3/8 inch backset fits standard residential door preps
• Square rose provides a defined, architectural frame at the door face
• Oil Rubbed Bronze finish for a dark, matte appearance consistent with traditional and transitional interiors
• Passage function — no locking mechanism, suitable for hallways and closets
• Compatible with door thickness from 1-1/4 inches to 2 inches

Compatibility

Designed for left-hand interior doors with a 1-1/4 inch to 2 inch door thickness and a standard 2-3/8 inch backset bore. Passage function only — not intended for entry doors or privacy applications.

Installation Notes

Installation should be performed by a finish carpenter or qualified door hardware installer. Verify door hand orientation before ordering, as lever sets are handed and cannot be reversed after assembly. Confirm the existing bore diameter and backset measurement match this unit before installation. Disconnect any related electrical or access control wiring, if present, before beginning work on adjacent hardware.