Emtek 5109HLOUS10BLH Helios Lever Passage Set Left Hand

Product Description

The EMTEK 5109HLOUS10BLH is a left-hand Helios lever passage set designed for interior doors where latching without locking is required. It ships with a 2-3/8 inches backset latch and mounts on a Disk Rose that suits doors ranging from 1-1/4 inches to 2 inches in thickness. The lever and rose are finished in Oil Rubbed Bronze, a dark, hand-applied tone commonly specified in transitional and traditional residential interiors. Passage sets in this configuration are standard for hallway and closet doors. The assembly weighs 4.15 pounds and ships as a single unit.

This passage set is intended for residential interior door applications where a turn or key function is not needed. Typical install locations include hallways, closets, and common-area doors. The Disk Rose provides a clean, low-profile mounting surface. The left-hand designation refers to the hinge placement and swing direction, and must be matched to the door before ordering. Door thickness must fall between 1-1/4 inches and 2 inches for proper latch and trim fitment.

Key Features

• Passage function — no locking mechanism, suitable for hallways and closets
• Left-hand configuration for correct lever orientation on hinge-left doors
• 2-3/8 inches backset latch included
• Disk Rose trim fits doors 1-1/4 inches to 2 inches thick
• Oil Rubbed Bronze finish for a dark, understated appearance
• Sold as a single complete unit

Compatibility

Designed as an OEM-style passage set replacement or new installation for standard residential interior doors with a 2-3/8 inches backset and door thickness between 1-1/4 inches and 2 inches.

Installation Notes

Installation is typically performed by a finish carpenter or skilled DIYer following standard door hardware procedures. Confirm door hand and swing direction before installation to ensure the lever orientation is correct. A standard latch bore of 2-1/8 inches diameter and a cross-bore of 1 inches diameter are required; verify existing prep before ordering. Disengage any existing latch hardware and ensure the door is stationary before beginning the swap.