Emtek 5052MDCUS4 Modern Disc Crystal Knob Dummy Pair

Product Description

The EMTEK 5052MDCUS4 is a dummy pair set combining a Modern Disc Crystal Knob with a Modern Rectangular Rosette in a Satin Brass (US4) finish. Dummy sets are non-latching and non-turning - they mount flush to the door face for purely decorative use on surfaces such as bi-fold doors, wardrobe panels, or passage doors that do not require a latch mechanism. The crystal knob features a disc profile with a faceted glass appearance, paired with a clean rectangular rosette that suits contemporary and transitional interior styles. This set is installed by finish carpenters, interior trim contractors, or experienced DIYers working on residential door hardware applications.

The 5052MDCUS4 dummy pair is suited for interior residential applications where a matching knob appearance is needed on both sides of a non-latching door. The Modern Rectangular Rosette provides a low-profile, geometric base that complements modern interior door designs. The Satin Brass finish coordinates with other US4-finish hardware throughout a space. The set ships as a pair, providing hardware for both faces of a single door in one package.

Key Features

• Dummy pair configuration - non-latching, decorative installation on both door faces
• Modern Disc Crystal Knob with faceted glass appearance
• Modern Rectangular Rosette base for a clean geometric profile
• Satin Brass (US4) finish on brass and crystal components
• Fits doors 1 3/8 inches to 2 1/4 inches thick with a standard 2 1/8 inch bore door prep
• Sold as a matching-finish pair for consistent appearance on both sides

Compatibility

Fits any door between 1 3/8 inches and 2 1/4 inches thick with a standard 2 1/8 inch bore door preparation. Intended for interior non-latching door applications.

Installation Notes

Dummy sets do not require a latch bore or strike plate - only the cross-bore hole is needed for mounting. Power down any associated door hardware systems and confirm the door thickness falls within the 1 3/8 inch to 2 1/4 inch range before installation. A screwdriver and drill with appropriate bit are the typical tools required. Follow the hardware manufacturer's template for rosette and knob alignment to ensure a flush, secure mount.