Emtek 2215US10B Rectangular Flush Pull Oil Rubbed Bronze

Product Description

The EMTEK 2215US10B is a modern rectangular flush pull finished in Oil Rubbed Bronze. Flush pulls are recessed door hardware components installed directly into the door face, providing a low-profile grip for sliding, pocket, or barn doors without protruding hardware. The 2215US10B measures 7.3 inches in length and 3 inches in width, with a profile depth of 0.3 inches, making it suitable for installations where clearance is limited. Licensed hardware installers and finish carpenters are the typical trades handling this component. The Oil Rubbed Bronze finish delivers a dark, muted tone consistent with transitional and contemporary design schemes.

This flush pull is suited for residential and light commercial pocket door, sliding door, and barn door applications. The low-profile rectangular form integrates cleanly into routed door mortises. Its slim 0.3-inch depth minimizes material removal during installation. The part ships as a single unit and is appropriate for interior door applications where surface-mounted pulls are not desired.

Key Features

• Low-profile flush mount design at 0.3 inches deep keeps hardware recessed within the door face
• 7.3-inch length provides a full-hand grip surface for comfortable door operation
• 3-inch width suits standard mortise routing for pocket and sliding doors
• Oil Rubbed Bronze finish complements transitional, industrial, and contemporary interiors
• Rectangular modern profile for clean, minimal visual impact

Compatibility

Designed as a flush pull replacement or new-install component for pocket doors, sliding doors, and barn doors requiring a mortised, recessed pull in an Oil Rubbed Bronze finish.

Installation Notes

Installation is typically performed by a finish carpenter or licensed hardware installer. The door face must be routed to the correct mortise depth before the pull is set and fastened. Ensure the door panel is fully removed from its track or secured in place before routing or fastening. Follow the fastener pattern supplied with the unit and do not overdrive screws into the door face material.