Elkhart Products 3/4 X 3/4 Wrot Copper Reducing Tee

Product Description

The ELKHART PRODUCTS 3/4 X 3/4 is a wrot copper reducing tee designed for soldered (sweat) copper piping systems. Configured as C x C x C, it connects 3/4-inch run ports to a 1/2-inch branch outlet, making it a standard choice when stepping down branch supply lines in water distribution and hydronic systems. Weighing just 0.112 pounds, the fitting is machined from wrot copper, which offers tighter dimensional tolerances and a denser grain structure than cast fittings. Licensed plumbers and pipefitters install this type of fitting in residential and light commercial applications where reliable, leak-free solder joints are required.

This reducing tee is suited for domestic cold and hot water supply lines, hydronic heating distribution piping, and other copper-compatible fluid systems where a 3/4-inch main run must feed a 1/2-inch branch. The sweat connection type requires standard copper flux, solder, and a torch, and is compatible with Type L and Type M copper tubing in the corresponding nominal sizes. It is part of the Elkhart Products Model 111R fitting line within the WROT product series.

Key Features

• Wrot copper construction for tight dimensional tolerances and strong solder joints
• 3/4 inches x 3/4 inches x 1/2 inches reducing configuration steps down branch line size in a single fitting
• C x C x C sweat connections compatible with standard copper tubing and soldering procedures
• Lightweight at 0.112 pounds, minimizing load on piping systems
• Compact profile — 2.13 inches wide, 1.43 inches long, 0.97 inches tall — fits in tight chase and wall cavity installations

Compatibility

Designed as an OEM-style wrot copper sweat fitting compatible with 3/4-inch nominal copper run pipe and 1/2-inch nominal copper branch pipe following standard C x C x C solder joint configurations.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and fully drain the affected lines before cutting and fitting. Clean all tube ends and fitting cups with emery cloth, apply appropriate flux, and solder with lead-free solder per applicable code requirements. Avoid overheating the fitting, as excessive heat can damage the copper and compromise joint integrity.

Technical Specifications

• Model: 111R
• Product Line: WROT
• Material: Copper
• Connection Type: C x C x C (Sweat/Solder)
• Run Size: 3/4 inches x 3/4 inches
• Branch Size: 1/2 inches
• Length: 1.43 inches
• Width: 2.13 inches
• Height: 0.97 inches
• Weight: 0.112 pounds
• UPC: 683264327740

Standard Information

• Brand: ELKHART PRODUCTS
• Manufacturer Part Number: 3/4 X 3/4