Elkay Residential LRADQ2521403 Drop-in Kitchen Sink Ada

Product Description

The ELKAY RESIDENTIAL LRADQ2521403 is a drop-in, single-bowl kitchen sink constructed from 18-gauge Type 304 stainless steel. It measures 25 inches by 21.25 inches by 4 inches and is designed for countertop cutout installation from above. The Quick-Clip Mounting System secures the sink without requiring under-counter access, making it compatible with countertops up to 0.75 inches thick. Sound-deadening pads are bonded to the underside to reduce vibration and noise during use. The sink meets ADA compliance standards when properly installed and is manufactured in the USA.

This sink is suited for residential kitchen installations where a drop-in configuration is required. The single-bowl layout provides an uninterrupted basin for dishwashing and food prep tasks. Three pre-drilled faucet holes offer flexibility in fixture selection. The rear center drain placement, positioned at 3.5 inches, keeps the area beneath the sink clear for storage and plumbing access. Licensed plumbers and experienced installers typically handle countertop cutout and final connection work on projects requiring ADA-compliant positioning.

Key Features

• 18-gauge Type 304 stainless steel construction resists corrosion and daily wear
• Quick-Clip Mounting System allows top-down installation without under-counter tools
• Sound-deadening pads bonded to basin reduce noise and vibration
• 3.5-inch rear center drain placement maximizes under-sink storage and plumbing clearance
• Three pre-drilled faucet holes accommodate a wide range of faucet configurations
• ADA compliant when properly installed; repairable finish resists visible light scratching
• Made in the USA

Compatibility

Designed as a drop-in replacement or new-installation sink for residential kitchen countertops up to 0.75 inches thick. Requires a standard countertop cutout sized to the sink dimensions. Compatible with 3.5-inch standard drain assemblies.

Installation Notes

Installation should be performed by a licensed plumber or qualified tradesperson familiar with IPC requirements for sink mounting and drain connections. Shut off the water supply and disconnect any existing plumbing before removing an existing sink. Apply a continuous bead of silicone sealant around the countertop cutout perimeter before dropping the sink into position, then secure with the included Quick-Clip fasteners. Do not overtighten the mounting clips, as this can distort the sink flange or damage the countertop surface.