Elkay Residential LRADQ1720603 Kitchen Sink 18 Gauge

Product Description

The ELKAY RESIDENTIAL LRADQ1720603 is a single-bowl, top-mount kitchen sink constructed from 18-gauge Type 304 stainless steel. It measures 17 x 20 x 6 inches overall, with a square bowl interior of 14 x 14 inches and a bowl depth of approximately 6 inches. The rear center drain placement improves under-sink storage access. Sound-deadening pads are factory-applied to the underside to reduce noise during use. This sink is designed for residential kitchen installations and is assembled in the USA. Licensed plumbers and experienced tradespersons are the typical installers for this fixture type.

This sink fits residential kitchen applications requiring a compact single-bowl configuration. The top-mount design allows direct drop-in installation onto laminate countertops using the included Quick-Clip mounting system. The 3.5-inch drain opening is compatible with standard kitchen basket strainer assemblies. A minimum cabinet width of 21 inches is required for proper installation. When installed per manufacturer guidelines, the sink meets ADA compliance requirements, making it suitable for accessible kitchen designs in both private residences and qualifying commercial settings.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and durability
• Quick-Clip mounting system for top-mount installation on laminate countertops
• Rear center drain placement maximizes under-sink storage clearance
• Factory-applied sound-deadening pads reduce basin noise
• Scratch-resistant satin finish blends light surface wear over time
• ADA compliant when installed per manufacturer specifications
• 3-hole faucet configuration for standard deck-mount faucet sets

Compatibility

Designed as a top-mount drop-in replacement or new-install single-bowl kitchen sink for residential countertop cutouts. Requires a minimum cabinet width of 21 inches. Compatible with standard 3.5-inch kitchen drain basket strainers and 3-hole deck-mount faucet sets.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off water supply lines and disconnect existing drain connections before removing any existing sink. Use the Quick-Clip hardware provided to secure the sink to the countertop deck and apply a continuous bead of plumber's putty or silicone sealant around the sink rim before setting. Do not overtighten mounting clips, as this can distort the sink flange or damage laminate countertop surfaces.