Elkay LRAD332240MR2 Drop-in Double Bowl Sink 33x22

Product Description

The ELKAY LRAD332240MR2 is a drop-in, double bowl kitchen sink constructed from 18-gauge Type 304 stainless steel with a satin finish. It measures 33 inches by 22 inches overall, with each rectangular bowl measuring 13.5 inches in length by 16 inches in width and a bowl depth of 4 inches. The sink features an offset drain design that maximizes the usable cabinet space below, with drains positioned at the rear center of each bowl. Sound-deadening pads are bonded to the underside to reduce vibration and noise during use. This sink is manufactured in the USA and ships at approximately 21.25 pounds.

This sink is suited for residential kitchen installations where a drop-in configuration is required. The U-channel mounting system uses clips that seat inside the sink channel, allowing for a straightforward countertop installation. The ADA-compliant bowl depth makes it appropriate for accessible kitchen designs. The MR2 faucet hole configuration supports a pre-drilled setup compatible with widespread or two-handle faucet arrangements. A minimum cabinet width of 36 inches is required for proper fitting.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Dual equal-sized rectangular bowls measuring 13.5 inches by 16 inches each
• Offset rear-center drain placement maximizes under-sink storage and cabinet access
• Sound-deadening pads bonded to the underside to reduce noise and vibration
• U-channel drop-in mounting design for simplified clip-based countertop installation
• ADA-compliant bowl depth
• MR2 faucet hole configuration pre-drilled at the factory

Compatibility

Designed as a drop-in replacement or new-installation sink for residential kitchen countertops with a minimum cabinet width of 36 inches. Countertop cutout dimensions are 32-3/8 inches by 21-3/8 inches with a corner radius of 1-1/2 inches. Compatible with MR2 faucet configurations.

Installation Notes

Installation is performed by a licensed plumber or qualified tradesperson following applicable IPC guidelines. Shut off the water supply and disconnect existing drain plumbing before beginning any sink replacement. The U-channel clip system secures the sink to the countertop deck from below - apply a continuous bead of silicone sealant around the cutout perimeter before seating the sink. Verify cabinet and countertop cutout dimensions against the 32-3/8 inches by 21-3/8 inches specification before cutting.